DLP Design DLP-IO8-G USB-Based 8-Channel Data Acquisition Module
DLP Design Data Acquisition Systems (DAQ). Channels: ** 8 configurable channels, Voltage: ** 5 V via USB host port.
- Model
- DLP Design DLP-IO8-G
- Calibration
- Available on request
- Price
- $145
- Status
- In stock
- RFQ ref
- DLP-IO8-G
This unit
The DLP Design DLP-IO8-G is a USB-powered 8-channel data acquisition module for industrial and laboratory applications. Each channel configures independently as a digital input, digital output, analog input, or temperature sensor interface. Operation is controlled via simple single-byte commands over USB 1.1/2.0, making it suitable for terminal emulation or custom software integration without external power supplies.
Technical Specifications
Channels: 8 configurable channels
Digital I/O: High/low read and write capability; 25 mA sink/source per channel
Analog Input: 10-bit ADC, 0–5 V range, 4.9 mV resolution (5 V / 1024)
Temperature Sensing: DS18B20+ compatible (sensor sold separately); -55°C to 125°C (-67°F to 257°F)
USB Interface: USB 1.1 and 2.0 compliant; 115200 baud terminal rate
Data Output: ASCII text or binary format selectable
Supply Voltage: 5 V via USB host port
Operating Temperature: 0°C to 70°C
I/O Voltage Range: -0.3 V to +5.3 V with respect to ground
Key Features
No external power supply required
USB enumeration and operation from single host connection
Compact form factor with terminal block connectors for field wiring
Mixed-mode channel operation - assign pins independently to I/O, analog, or sensor functions
Single-byte command protocol reduces firmware complexity and enables rapid prototyping
Immediate ASCII readout via standard terminal emulators or binary data for scripted acquisition
Typical Applications
Data logging and process monitoring in benchtop systems
Digital signal acquisition with simultaneous analog measurement
Temperature monitoring using one-wire DS18B20+ sensors
Control logic and relay switching in automated test setups
Laboratory instrumentation integration without dedicated DAQ hardware
Compatibility & Integration Works with terminal emulator software or custom applications in any language supporting USB serial communication. Driver requirements depend on host OS and software package; drivers are included with some distributions or available separately. Requires separate DS18B20+ sensor purchase for temperature measurement channels.
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | 0–5 V (analog input), 25 mA sink/source per I/O, 5 V USB supply |
DLP Design DLP-IO8-G — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the DLP Design DLP-IO8-G. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
DLP Design DLP-IO8-G price
This DLP Design DLP-IO8-G is listed at $145. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
DLP Design DLP-IO8-G calibration cost
NIST-traceable calibration for the DLP Design DLP-IO8-G is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
