Agilent/Keysight DSAX92504A

Agilent / Keysight Digital Oscilloscopes. Bandwidth: 25 GHz analog (upgradeable to 33 GHz), Channels: 4 analog, Sample Rate: 80 GSa/s (2 channels).

Model
Agilent / Keysight DSAX92504A
Calibration
Available on request
Price
$6,500
Status
In stock
RFQ ref
DSAX92504A
View cart
Prefer to talk? Call +1 (484) 841-9341

This unit

The Agilent/Keysight DSAX92504A is a 25 GHz digital signal analyzer with four analog channels designed for high-speed signal measurement and waveform analysis in communications, aerospace, and defense applications. The instrument delivers true analog bandwidth upgradeable to 33 GHz, achieving sample rates of 80 GSa/s on two channels or 40 GSa/s across all four channels. Memory depth extends to 2 Gpts with standard 50 Mpts per channel, enabling capture of complex transient events and long signal sequences.


Native 8-bit vertical resolution scales to 10 bits and ≥12 bits with averaging. The DSA achieves jitter measurement floor below 150 fS and noise floor of 1.53 μVrms at 5 mV/div, supporting precision timing and signal integrity analysis.


Technical Specifications



  • Bandwidth: 25 GHz analog (upgradeable to 33 GHz)

  • Channels: 4 analog

  • Sample Rate: 80 GSa/s (2 channels), 40 GSa/s (4 channels)

  • Memory Depth: Up to 2 Gpts; standard 50 Mpts per channel

  • Input Impedance: 50 Ω ± 3%

  • Vertical Resolution: 8 bits native; ≥12 bits with averaging; up to 10 bits

  • Noise Floor: 1.53 μVrms at 5 mV/div; 2.30 mVrms at 33 GHz, 50 mV/div

  • Jitter Measurement Floor: <150 fS

  • Maximum Input Voltage: ±5 V (5 Vrms)

  • DC Gain Accuracy: ±2% full scale (±2.5% at 5 mV/div)

  • Channel Isolation: 60 dB DC–3 GHz; 40 dB 3–8 GHz; 35 dB 8 GHz–BW

  • Display: 12.1-inch XGA touchscreen (1024 × 768), 256-level grayscale

  • Waveform Update Rate: Up to 400,000 waveforms/second (segmented memory mode)


Key Features



  • Trigger modes: Edge, Pulse Width, Runt, Timeout, Pattern, Setup/Hold, Window, Qualified, Logic, Sequence, Holdoff

  • InfiniiScan optional advanced triggering with measurement mode, zone qualify, generic serial, non-monotonic edge

  • Probing system with 30 GHz bandwidth; upgradeable probes

  • Pre-built compliance software for SAS 6G, SATA 6G, SAS 12G, GDDR5, PCIe Gen 3, DisplayPort 1.2, QPI, 10GBaseKR

  • MATLAB support for custom measurement routines


Interfaces



  • Four USB 2.0 host ports; one USB 2.0 device port (rear)

  • 10/100/1000 BaseT LAN with web connectivity

  • GPIB card interface

  • HDMI and DisplayPort connectivity

Agilent / Keysight DSAX92504A — Repair & Calibration Service

Aumictech offers NIST-traceable calibration and repair for the Agilent / Keysight DSAX92504A. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.

Standard Cal
$450
Pass/fail cert + NIST sticker
Cal with Data
$650
Full NIST cert with measured values

Agilent / Keysight DSAX92504A price

This Agilent / Keysight DSAX92504A is listed at $6,500. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.

Agilent / Keysight DSAX92504A calibration cost

NIST-traceable calibration for the Agilent / Keysight DSAX92504A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →