Agilent / Keysight DSO1022A Oscilloscope, 200 MHz, 2 Analog Channels

The Agilent/Keysight DSO1022A is a 200 MHz, 2-channel digital storage oscilloscope engineered for signal acquisition and analysis across electronics testing, education, and research environments. This instrument delivers real-time waveform capture at up to 2 GSa/s per channel (single-channel mode) or 1 GSa/s per channel (dual-channel mode), with 20 kpts memory depth per channel in single-channel configuration. The 5.7-inch color LCD display with wide viewing angle provides clear signal visualization, while True zoom mode enables simultaneous viewing of main and magnified waveforms.

Technical Specifications

• Bandwidth: 200 MHz


• Analog Channels: 2


• Sample Rate: 2 GSa/s per channel (half channels); 1 GSa/s per channel (both channels)


• Acquisition Memory: 20 kpts per channel (half channels); 10 kpts per channel (both channels)


• Input Impedance: 1 MΩ ±1% in parallel with 18 pF ±3 pF


• Input Sensitivity: 2 mV/div to 10 V/div


• Maximum Input Voltage: 400V peak with 1.6 kVpk transient overvoltage (CAT I)


• Vertical Gain Accuracy: ±4.0% full scale (2–5 mV/div); ±3.0% full scale (10 mV/div–5 V/div)


• Hardware Frequency Counter: 6-digit

Key Features

• 23 automatic measurements including frequency and peak-to-peak voltage


• Waveform math functions: addition, subtraction, multiplication, and FFT


• Advanced triggering modes: edge, pulse width, pattern, composite video, and alternate channel


• Sequence mode records and plays back up to 1000 captured waveforms


• Go/No-Go mask testing detects waveforms deviating from reference standards


• Peak detect captures glitches as narrow as 10 nsec


• Selectable averaging (2–256 runs) for noise reduction


• Digital band-pass and low-pass filtering


• Autoscale function optimizes vertical, horizontal, and trigger settings


• Manual or automatic measurement cursors


• Roll mode for continuous left-to-right waveform display


• Multi-language interface supporting 11 languages with integrated help


• Probe compensation output

Typical Applications Electronics troubleshooting, educational demonstrations, research signal analysis, and design validation.

Compatibility & Integration Two USB 2.0 host ports (front and rear) support data export to USB flash drives and firmware updates. Operates on 100–240V AC supply.