Agilent / Keysight DSO1024A Oscilloscope, 200 MHz, 4 Analog Channels

The Agilent/Keysight DSO1024A is a 200 MHz, 4-channel digital storage oscilloscope built for electronic testing, measurement, and signal analysis across laboratory and field environments. It delivers real-time sample rates to 2 GSa/s (single channel) or 1 GSa/s (all channels active), with 20 kpts memory depth per channel and 8-bit vertical resolution. The 5.7-inch color LCD display supports true zoom mode for simultaneous detailed and overview waveform capture, while 23 automatic measurements and waveform math - including FFT with selectable windows (Rectangle, Hanning, Hamming, Blackman) - enable rapid signal characterization.

Technical Specifications

• Bandwidth: 200 MHz (-3 dB)


• Channels: 4 analog


• Real-time sample rate: 2 GSa/s (half channel interleaved); 1 GSa/s (all channels active)


• Memory depth: 20 kpts (half channel interleaved); 10 kpts (all channels active)


• Vertical resolution: 8 bits


• Vertical sensitivity: 2 mV/div to 10 V/div


• DC gain accuracy: ±4.0% full scale (2–5 mV/div); ±3.0% full scale (10 mV/div–5 V/div)


• Input coupling: AC, DC, GND


• Maximum input voltage: 400 Vpk (CAT I 300 Vrms); transient overvoltage 1.6 kVpk


• Input impedance: 1 MΩ || 18 pF


• Timebase range: 1 ns/div to 50 sec/div


• Display: 5.7-inch color LCD, 320 × 234 resolution

Key Features

• Advanced triggering: falling-edge, impulse width, rising-edge, video signal types; automatic and normal modes


• Trigger sources: CH1, CH2, external signal, supply voltage


• Acquisition modes: normal, averaging (up to 256 runs), sequence (up to 1000 frames), peak detect (10 ns glitch capture), roll


• Waveform math: addition, subtraction, multiplication, FFT


• Digital filtering: selectable band-pass


• Go/no-go mask testing for automated pass/fail validation


• Sequence mode records and plays back up to 1000 trigger events

Connectivity

• USB host ports: 2 × USB 2.0 (front and rear panel) for flash drive storage and firmware updates


• USB device port: USB TMC for remote PC control; PictBridge-compatible printer connection


• Probe compensation output