Keysight / Agilent / HP E1503A 8-Channel Programmable Filter/Gain SCP Module

The Keysight E1503A is an 8-Channel Programmable Filter/Gain SCP Module. This module offers programmable filtering and gain capabilities for signal conditioning in various test and measurement applications. It features eight independent channels, each configurable for different filter types and gain settings.

Model
Agilent E1503A
Calibration
Available on request
Price
$450
RFQ ref
E1503A
View cart
Prefer to talk? Call +1 (484) 841-9341

This unit

The Keysight/Agilent/HP E1503A is an 8-channel programmable filter/gain signal conditioning plug-on (SCP) module for VXI mainframe systems. Each channel delivers independent low-pass filtering and gain adjustment, enabling precise signal conditioning across low-level voltage, temperature, resistance, and strain measurement applications. The module combines programmable 2-pole filters with three gain settings to optimize signal acquisition for diverse sensor types and dynamic ranges.

Technical Specifications

Channels: 8 independent channels

Filter Type: Programmable 2-pole low-pass with cutoff frequencies of 2 Hz, 10 Hz, 100 Hz, plus pass-through mode (1.5 kHz effective bandwidth)

Gain Settings: ×1, ×8, ×64

Input Voltage Ranges: ±0.25 V, ±2 V, ±16 V

Output Range: 3.9 mV to 16 V full-scale

Maximum Operating Input: ±42 V peak

Gain Temperature Coefficient: 15 ppm/°C

Offset Temperature Coefficients: 0.16–0.39 µV/°C (dependent on temperature range and filter setting)

Typical Offsets (×8 Gain, filter ON): 2 Hz filter 13 µV, 10 Hz filter 9.5 µV, 100 Hz filter 6.8 µV, filter off 6.3 µV

Key Features

Per-channel input over-voltage protection and open transducer detection

Flexible gain and filter configuration for each channel independently

Low offset drift supports precision low-level signal measurement

SCP module form factor integrates into standard VXI mainframes

Typical Applications

Low-level voltage measurements

Thermocouple, thermistor, and RTD temperature acquisition

Resistance measurements

Strain measurements (with E1506A or E1507A Strain Completion SCPs)

Compatibility & Integration Compatible with Agilent/HP VXI mainframe modules including the E1413C 64-Channel Scanning A/D Converter, E1415A Algorithmic Closed Loop Controller, E1419A Multifunction Measurement and Control Module, E1422A Remote Channel Multi-function DAC Module, and HP E1313A/E1413A/B. Pairs with companion modules such as the E1505A 8-Channel Current Source SCP for expanded measurement capability.

Specifications

ParameterValue
Frequency Range10 Hz, 100 Hz (filter cutoff)
1.5 kHz (pass-through mode), 2 Hz | Voltage / Current Range±0.25 V, ±16 V input

Agilent E1503A — Repair & Calibration Service

Aumictech offers NIST-traceable calibration and repair for the Agilent E1503A. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.

Standard Cal
$450
Pass/fail cert + NIST sticker
Cal with Data
$650
Full NIST cert with measured values

Agilent E1503A price

This Agilent E1503A is listed at $450. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.

Agilent E1503A calibration cost

NIST-traceable calibration for the Agilent E1503A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →