Agilent E4401B 1.5 GHz RF Spectrum Analyzer
Agilent E4401B 1.5 GHz RF Spectrum Analyzer,"A reliable spectrum analyzer with frequency coverage up to 1.5 GHz, it is suited for general-purpose RF signal analysis. Ideal for verifying communication signals, locating interference, and characterizing components. With strong measurement accuracy and intuitive interface, it's used in education, production testing, and wireless diagnostics."
- Model
- Agilent E4401B
- Calibration
- Available on request
- Price
- $3,593
- RFQ ref
- E4401B
This unit
The Agilent E4401B is a 1.5 GHz RF spectrum analyzer engineered for signal verification, interference detection, and component characterization across educational, manufacturing, and wireless diagnostic environments. It delivers amplitude accuracy of ±0.5 dB with a displayed average noise level of -147 dBm (typical, 1 GHz, RBW 10 Hz) and spurious-free dynamic range exceeding 80 dB.
Technical Specifications
Frequency Performance- Frequency span: 1 kHz to 1.5 GHz
- Center frequency resolution: 1 Hz
- Resolution bandwidth: 1 Hz to 3 MHz (1-3-10 sequence)
- Video bandwidth: 1 Hz to 3 MHz (1-3-10 sequence)
- Phase noise: -100 dBc/Hz at 10 kHz offset (typical) Input & Dynamic Range
- Input impedance: 50 Ohms
- Maximum input level: +20 dBm (10 MHz to 1.5 GHz)
- RF attenuator: 0 dB to 50 dB in 1 dB steps
- Spurious-free dynamic range: >80 dB (typical) Power & Environmental
- Input voltage: 100-120 VAC or 200-240 VAC, 47-63 Hz
- Power consumption: approximately 100 VA
- Operating temperature: 0°C to 50°C
- Storage temperature: -40°C to 70°C
Key Features
- Signal level measurement: amplitude, power, voltage
- Channel power and adjacent channel power (ACP) measurement
- Occupied bandwidth determination
- Harmonic distortion and third-order intercept (TOI) characterization
- Triggering modes: free run, video, external
- 1024 × 768 monochrome LCD display
- Minimum attenuator setting: 0 dB; maximum: 50 dB
Typical Applications
- Communication signal verification
- RF interference source identification
- Electronic component characterization
- Production line testing
Compatibility & Integration
- GPIB (IEEE-488) for remote control and data acquisition
- RS-232 serial communication
- Centronics parallel port for printer output
- External 10 MHz reference input
- Physical dimensions: 170 mm H × 422 mm W × 467 mm D
- Weight: 15.9 kg
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 9 kHz to 1.5 GHz (50 Ω) |
| 1 MHz to 1.5 GHz (75 Ω) | Power Range (dBm) | '-154 dBm to +30 dBm |
Agilent E4401B — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Agilent E4401B. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Agilent E4401B price
This Agilent E4401B is listed at $3,592.6. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Agilent E4401B calibration cost
NIST-traceable calibration for the Agilent E4401B is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
