Keysight (Agilent) E5062A ENA-L Network Analyzer, 300kHz-3GHz

The Keysight (Agilent) E5062A ENA-L is a 2-port network analyzer operating from 300 kHz to 3 GHz, engineered for RF component characterization and circuit validation in R&D and manufacturing environments. It delivers 120 dB dynamic range, 0.001 dB RMS trace noise, and sub-millisecond sweep performance. The instrument combines precise magnitude (±0.1 dB) and phase (±0.5°) accuracy with flexible measurement capability across S-parameters, LCR, group delay, and power compression modes.

Technical Specifications

• Frequency Range: 300 kHz to 3 GHz


• Frequency Resolution: 1 Hz


• Frequency Accuracy: ±2.5 ppm at 25°C


• Frequency Stability: ±0.5 ppm/year


• Sweep Modes: Frequency, List Measurement Capability


• Configuration: 2-port network analysis


• Dynamic Range: 120 dB at 1 GHz (S21 transmission)


• Trace Noise: 0.001 dB RMS at 1 GHz (S21)


• Magnitude Accuracy: ±0.1 dB


• Phase Accuracy: ±0.5 degrees


• Measurement Parameters: S11, S12, S21, S22, LCR, group delay, response, gain compression, power, swept power


• Calibration: Full 2-port and 1-port SOLT (Short, Open, Load, Through)


• IF Bandwidth: 10 Hz to 10 MHz (1-3-10 sequence) Signal Generation & Detection


• Output Power Range: -60 dBm to +10 dBm


• Power Accuracy: ±0.5 dB at 1 GHz


• Output Impedance: 50 Ω


• Receiver Type: Dual-channel


• Detector Types: Logarithmic, Linear, Logarithmic power Sweep Performance


• Sweep Time: 31 ms/point at 1 GHz (fast sweep mode)


• Data Points: Up to 1601 points per sweep

Key Features

• Color LCD display with internal trace and settings memory


• Type-N female connectors (2× 50 Ω test ports)


• GPIB and USB control interfaces


• USB and optional Ethernet data transfer

Typical Applications Filter and amplifier characterization, impedance matching, component validation, transmission line analysis, gain and phase response measurement, power compression testing.

Compatibility & Integration Supports test port extenders, calibration kits, fixtures, and Agilent/Keysight VNA software for data analysis and remote control. AC power: 100–240 VAC, 50/60 Hz.