Agilent/Keysight E5072A
Agilent / Keysight Network Analyzers. Frequency Range: 30 kHz to 4.5 GHz (Option 245); 30 kHz to 8.5 GHz (Option 285), Power Range (dBm): –85 to +16 dBm (leveled output, 300 kHz to 1 GHz), 300 kHz to 3 GHz); up to +20 dBm (test port.
- Model
- Agilent / Keysight E5072A
- Calibration
- Available on request
- Price
- $21,980
- Status
- In stock
- RFQ ref
- E5072A
This unit
The Keysight E5072A is a 2-port network analyzer built for RF component characterization across R&D and manufacturing environments. It delivers dynamic range to 151 dB with direct receiver access and measurement speeds as fast as 7 milliseconds for full 2-port calibration at 401 points. The configurable test set provides direct access to internal signal paths - source, receivers, and bridges - enabling specialized measurements and external component integration.
This architecture supports full performance characterization of passive and active components including antennas, filters, and high-power amplifiers, with single power-sweep capability for nonlinear device analysis.
Technical Specifications
- Frequency Range: 30 kHz to 4.5 GHz (Option 245); 30 kHz to 8.5 GHz (Option 285)
- Dynamic Range: Up to 130 dB; 151 dB with direct receiver access; 98 dB system dynamic range under specified boundary conditions
- Output Power: –85 to +16 dBm leveled (300 kHz to 3 GHz); up to +20 dBm from test port (300 kHz to 1 GHz); 65 dB power sweep range
- Measurement Speed: 7 ms (full 2-port calibration, 401 points); 33 ms (IFBW = 100 kHz, 200 MHz span, 1601 points)
- Temperature Stability: 0.005 dB/°C
- Trace Noise: 0.004 dB rms (IFBW = 70 kHz)
- Display: 10.4-in
- Ports: 2
Key Features
- Direct receiver access for extended dynamic range measurements
- Configurable test set with access to source, receiver, and bridge signal paths
- S-parameter, time-domain, and frequency-domain measurement capability
- Passive Intermodulation (PIM) measurement combined with S-parameter analysis
- Nonlinear device characterization via single power sweep
- High-power measurement support for real-condition device testing
Typical Applications
- Active and passive RF component characterization
- Filter and antenna performance validation
- High-power amplifier testing
- Time-domain reflectometry and impedance analysis
- PIM detection in passive networks
Compatibility & Integration
- 100% code compatible with E5071C (firmware revision 9.61 or earlier)
- Code emulation tool (cXL) for 8753ES migration
- USB and GPIB interfaces
- VBA (Visual Basic for Applications) support for automation and custom interfaces
- Power meter control via 82357B interface
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 30 kHz to 4.5 GHz (E5072A-245) |
| 30 kHz to 8.5 GHz (E5072A-285) | Power Range (dBm) | −109 dBm to +20 dBm source power |
Agilent / Keysight E5072A — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Agilent / Keysight E5072A. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Agilent / Keysight E5072A price
This Agilent / Keysight E5072A is listed at $21,980. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Agilent / Keysight E5072A calibration cost
NIST-traceable calibration for the Agilent / Keysight E5072A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
