Agilent E5100B 300MHz High-Speed Network Analyzer

Agilent E5100B 300MHz High-Speed Network Analyzer,"This high-speed network analyzer covers up to 300 MHz, suitable for low-frequency impedance and S-parameter measurements. It features a fast sweep time and wide dynamic range, ideal for component and circuit analysis. Used in R&D and production environments, it supports accurate evaluation of filters, resonators, and networks."

Model
Agilent E5100B
Calibration
Available on request
Price
$2,232
Status
In stock
RFQ ref
E5100B
View cart
Prefer to talk? Call +1 (484) 841-9341

This unit

The Agilent E5100B is a 300 MHz high-speed network analyzer engineered for precise low-frequency impedance and S-parameter measurements across R&D and production environments. Operating from 10 kHz to 300 MHz, the instrument delivers sweep speeds as fast as 0.04 ms/point and dynamic range exceeding 100 dB, making it ideal for high-throughput component characterization.


Technical Specifications



  • Frequency Range: 10 kHz to 300 MHz

  • Measurement Speed: 0.04 ms/point (30 kHz IFBW, ramp-sweep)

  • Dynamic Range: >100 dB (E5100B)

  • IF Bandwidth: 10 Hz to 30 kHz, configurable in 1, 1.5, 2, 3, 4, 5, and 8 step increments

  • Measurement Parameters: Gain (amplitude ratio), phase, group-delay, amplitude, gain-phase, gain-delay, impedance, admittance

  • Input Impedance: 50 Ω nominal (standard); 50 Ω / 1 MΩ, 30 pF (optional)

  • Output Power Range: –9 dBm to +11 dBm (standard); –48 dBm to +22 dBm (optional)

  • Points per Sweep: 401

  • Channels: 4

  • Power Requirements: 90–132 VAC or 198–264 VAC, 47–63 Hz, 400 VA max.


Key Features



  • High dynamic range performance enables detection of weak signals and loss measurement in complex networks

  • Configurable IF bandwidth from 10 Hz to 30 kHz optimizes measurement speed versus noise performance

  • Four-channel architecture supports multi-port device characterization

  • Extended output power range option (–48 dBm to +22 dBm) addresses low-level and high-power applications

  • Parallel I/O (TTL, 16-bit output, 8-bit input/output) with optional opto-isolation for production integration

  • IBASIC programming support with floppy disk and non-volatile memory storage


Typical Applications Filters, resonators, matching networks, and transmission-line characterization in manufacturing and design validation. Fast sweep times enable high-volume production testing of passive and active RF components.


Compatibility & Integration Works with the 41901A SMD PI-Network Test Fixture and E5090A 2-Port Transmission/Reflection Test Kit. Compact footprint: 177 mm (H) × 425 mm (W) × 425 mm (D); 12 kg.

Agilent E5100B — Repair & Calibration Service

Aumictech offers NIST-traceable calibration and repair for the Agilent E5100B. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.

Standard Cal
$450
Pass/fail cert + NIST sticker
Cal with Data
$650
Full NIST cert with measured values

Agilent E5100B price

This Agilent E5100B is listed at $2,231.8. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.

Agilent E5100B calibration cost

NIST-traceable calibration for the Agilent E5100B is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →