Agilent / Keysight E8362C 20 GHz PNA Microwave Network Analyzer
Agilent / Keysight Network Analyzers. Frequency range: 10 MHz to 20 GHz, Dynamic range: 123 dB, Channels: 32.
- Model
- Agilent / Keysight E8362C
- Calibration
- Available on request
- Price
- $61,376
- Status
- In stock
- RFQ ref
- E8362C
This unit
The Agilent/Keysight E8362C is a 20 GHz PNA Microwave Network Analyzer delivering high-accuracy S-parameter and advanced RF measurements from 10 MHz to 20 GHz. Built for R&D and manufacturing environments, it characterizes passive and active devices with 123 dB dynamic range, sub-0.006 dB trace noise, and measurement speeds under 26 µsec/point. The instrument supports 32 channels with up to 20,001 points per channel and provides two 3.5 mm 50-ohm test ports rated for +10 dBm output.
Technical Specifications
- Frequency range: 10 MHz to 20 GHz
- Dynamic range: 123 dB
- Trace noise: < 0.006 dB
- Measurement speed: < 26 µsec/point
- Channels: 32
- Points per channel: 20,001
- Output power: +10 dBm
- Test ports: 3.5 mm male 50-ohm
- Input ports: 2 Corrected system performance spans three frequency bands with directivity to 42 dB, source and load match specifications from 38–42 dB, and reflection/transmission tracking accuracy across 45 MHz to 20 GHz.
Key Features
- TRL/LRM calibration with on-wafer, in-fixture, waveguide, and antenna measurement support
- Mixer testing: conversion loss, return loss, isolation, and absolute group delay
- Amplifier characterization: gain compression, harmonic, IMD, and pulsed-RF measurements
- Unlimited resizable display windows with up to 24 active and 24 memory traces per window
- Multiple display formats: Log/linear magnitude, SWR, phase, group delay, real/imaginary, Smith chart, and polar
- Ten independent markers per trace with delta marker capability
- Go/no-go test limit definition
- Sweep modes: linear, CW, power, or segment sweep
Typical Applications
- High-accuracy mixer and converter characterization
- Antenna measurement and design validation
- Pulsed-RF and mm-wave component testing
- Manufacturing test and device qualification
Compatibility & Integration Optional configurations extend measurement capability, including time domain analysis (Option 010) and additional software modules.
Agilent / Keysight E8362C — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Agilent / Keysight E8362C. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Agilent / Keysight E8362C price
This Agilent / Keysight E8362C is listed at $61,376.38. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Agilent / Keysight E8362C calibration cost
NIST-traceable calibration for the Agilent / Keysight E8362C is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →