Rohde & Schwarz ESCS30 9 KHz – 2.75 GHz EMI Test Receiver
The Rohde & Schwarz ESCS30 is an EMI test receiver designed for conducted and radiated emissions testing in compliance with CISPR, EN, and FCC standards. It covers a frequency range of 9 kHz to 2.75 GHz, offering comprehensive analysis capabilities for pre-compliance and compliance testing. Features include real-time spectrum analysis, automated test routines, and detailed reporting, making it ideal for automotive, aerospace, and consumer electronics industries.
- Model
- Rohde & Schwarz ESCS30
- Calibration
- Available on request
- Price
- $5,200
- Status
- In stock
- RFQ ref
- ESCS30
This unit
The Rohde & Schwarz ESCS30 is a precision EMI test receiver covering 9 kHz to 2.75 GHz for conducted and radiated emissions testing. It operates as a manual tunable receiver, automatic test system, and IEC/IEEE-bus compatible instrument, serving pre-compliance and full compliance measurement roles across automotive, aerospace, and consumer electronics industries.
Technical Specifications
- Frequency Range: 9 kHz to 2.75 GHz
- Measurement Uncertainty: Typically < 0.5 dB; maximum 1 dB
- Level Measurement Range: −38 dBµV to +137 dBµV
- Noise Figure (9 kHz to 30 MHz, 200 Hz BW): < −25 dBµV without preamplifier; < −34 dBµV with preamplifier enabled
- Noise Figure (30 MHz to 1000 MHz, 120 kHz BW): < +1 dBµV without preamplifier; < −4 dBµV with preamplifier
- Noise Figure (1000 MHz to 2750 MHz, 120 kHz BW): < +5 dBµV without preamplifier; < 0 dBµV with preamplifier
- RF Attenuator: 0 to 60 dB in 5 dB steps
- Preamplifier: Selectable 10 dB gain
- Input Impedance: 50 Ω
- VSWR (f < 1000 MHz): 10 dB RF attenuation
- Maximum Input Level (RF Attenuation > 10 dB): DC 7 V; AC sinewave 137 dBµV (1 W); other 150 V maximum, 10 mWs maximum
- Resolution Bandwidth: 10 Hz to 1 MHz
- CISPR Bandwidths: 200 Hz, 9 kHz, 120 kHz, 1 MHz
- Detectors: Peak, Average, Quasi-peak, RMS-average, CISPR-average outputs
- Frequency Setting Resolution: 10 Hz to 1000 MHz; 100 Hz above 1000 MHz
- Frequency Drift: < 1 × 10⁻⁶ after 30 min warmup
Key Features
- Ten integrated preselectors: 2 fixed-tuned and 6 tracking filters (9 kHz–1000 MHz); 2 tracking filters (1000–2750 MHz)
- Automated frequency scanning up to 400 preset frequencies
- Multiple test modes: Manual, Auto, Full-auto, Quasi-peak, CISPR-average, RMS-average
- Measurement functions include EMI, EMI scan, EMI pre-scan, EMI sweep, EMI sequence
Compliance & Standards CISPR 16-1, VDE 0876, CISPR, EN, ETS, FCC, ANSI C63.4, VCCI, VDE
Integration IEC/IEEE-bus interface for system integration and remote control
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 9 kHz to 2.75 GHz | Voltage / Current Range: 10 mWs, DC 7 V |
Rohde & Schwarz ESCS30 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Rohde & Schwarz ESCS30. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Rohde & Schwarz ESCS30 price
This Rohde & Schwarz ESCS30 is listed at $5,200. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Rohde & Schwarz ESCS30 calibration cost
NIST-traceable calibration for the Rohde & Schwarz ESCS30 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
