JDS FITEL FBG-225TC2 SINGLE CHANNEL FIXED DROPED MODULE 50GHZ
Fitel Optical Attenuators. Wavelength: division multiplexed (DWDM) architectures., Channel: specific signal extraction in DWDM systems.
- Model
- Fitel FBG-225TC2
- Calibration
- Available on request
- Price
- $255
- Status
- In stock
- RFQ ref
- FBG-225TC2
This unit
The JDS FITEL FBG-225TC2 is a single-channel fixed dropped module engineered for 50 GHz channel spacing in fiber optic networks. This component performs precise filtering and isolation of specific optical channels, enabling efficient signal routing and management within larger optical communication systems. The fixed-drop architecture eliminates tuning complexity while maintaining deterministic channel performance in dense wavelength-division multiplexed (DWDM) architectures.
Technical Specifications
- Model: FBG-225TC2
- Channel Spacing: 50 GHz
- Configuration: Single-channel fixed dropped module
- Manufacturer: JDS FITEL (JDSU)
Key Features
- Fixed-channel design eliminates drift and tuning requirements
- Optimized for 50 GHz ITU grid compatibility
- Fiber optic–based filtering architecture
- Designed for channel-specific signal extraction in DWDM systems
Typical Applications
- DWDM network infrastructure requiring fixed channel drop functionality
- Optical communication systems with standardized 50 GHz channel spacing
- Signal management and routing in fiber optic backbones
- Channel isolation and extraction at network nodes
Compatibility & Integration This module integrates as a component within larger optical systems. The 50 GHz channel spacing specification is critical for verifying compatibility with existing DWDM infrastructure and ensuring proper interoperability in optical networks. Exact channel center wavelength alignment must be confirmed during system integration to guarantee performance and avoid crosstalk with adjacent channels.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 50 GHz |
Fitel FBG-225TC2 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Fitel FBG-225TC2. Calibration covers attenuation accuracy at 5 or more set values across the full range (0 to rated maximum dB), attenuation linearity, wavelength-dependent attenuation at 1310 nm, 1490 nm, and 1550 nm, insertion loss at minimum attenuation (0 dB position), and polarization-dependent loss (PDL) where applicable. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Fitel FBG-225TC2 faults: motor and gear mechanism wear (attenuation steps or loss of smooth control), optical port contamination, EEPROM calibration data corruption. Most common faults are motor or gear mechanism wear on variable attenuators causing attenuation steps or loss of smooth control, optical port contamination reducing dynamic range, and EEPROM calibration data corruption on digitally controlled models.
Fitel FBG-225TC2 price
This Fitel FBG-225TC2 is listed at $255. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Fitel FBG-225TC2 calibration cost
NIST-traceable calibration for the Fitel FBG-225TC2 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers attenuation accuracy at 5 or more set values across the full range (0 to rated maximum dB), attenuation linearity, wavelength-dependent attenuation at 1310 nm, 1490 nm, and 1550 nm, insertion loss at minimum attenuation (0 dB position), and polarization-dependent loss (PDL) where applicable. Turnaround is 1 to 3 business days after receipt. See full calibration details →
