Rohde & Schwarz FSEM30 20Hz-26.5GHz Spectrum Analyzer
Rohde & Schwarz Spectrum Analyzers. Frequency range: 20 Hz to 26.5 GHz, Dynamic range: 150 dB maximum.
- Model
- Rohde & Schwarz FSEM30
- Calibration
- Available on request
- Price
- $5,880
- RFQ ref
- FSEM30
This unit
The Rohde & Schwarz FSEM30 is a spectrum analyzer covering 20 Hz to 26.5 GHz, engineered for signal analysis, EMC testing, component characterization, and interference detection. It delivers exceptional measurement speed with a quasi-analog refresh rate of 25 sweeps/s and full-span sweep capability in 150 ms. The instrument analyzes both analog and digital modulated signals
AM, FM, PM, BPSK, QPSK, π/4-DQPSK, 8PSK, QAM, MSK, GMSK, and 2FSK - making it suitable for advanced digital communication system testing.
Technical Specifications
- Frequency range: 20 Hz to 26.5 GHz
- Resolution bandwidth (RBW): 1 Hz to 10 MHz, adjustable in 1/2/3/5/10 steps
- Video bandwidth (VBW): 1 Hz to 10 MHz, adjustable in 1/2/3/5 steps
- Displayed average noise level (DANL): -150 dBm in 10 Hz bandwidth
- Dynamic range: 150 dB maximum; 115 dB intermodulation-free
- Third-order intercept point (TOI): +20 dBm
- 1 dB compression point (RF input): +10 dBm
- Phase noise: -123 dBc/Hz at 10 kHz offset
- Level measurement uncertainty: <1 dB (up to 1 GHz), <1.5 dB (up to 7 GHz)
- Sweep time: 150 ms full-span, 1 µs zero-span; adjustable 1 µs to 1500 seconds
- Refresh rate: 25 sweeps/s quasi-analog display
- Input impedance: 50 Ohms
Key Features
- 9.5-inch active LC TFT display
- Internal and external RF triggering with threshold control
- Gated sweep and trigger delay capability
- Built-in AM/FM audio demodulator with loudspeaker and headphones output
- Modular architecture supporting optional upgrades
- IEEE/IEC remote control interface (option FSE-B17)
- Ethernet connectivity (option FSE-B16)
Typical Applications
- Electromagnetic compatibility (EMC) testing
- Digital and analog signal analysis
- Component and device characterization
- Site monitoring and spectrum surveillance
- Interference identification and analysis
Compatibility & Integration
- RF input: 50 Ohm N-type connector
- Remote control: IEC/IEEE bus with optional interface module
- Ethernet: Optional connectivity for network integration
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 20 Hz to 26.5 GHz | Power Range (dBm): '-150 dBm to +20 dBm |
Rohde & Schwarz FSEM30 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Rohde & Schwarz FSEM30. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Rohde & Schwarz FSEM30 price
This Rohde & Schwarz FSEM30 is listed at $5,880. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Rohde & Schwarz FSEM30 calibration cost
NIST-traceable calibration for the Rohde & Schwarz FSEM30 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →