Anritsu MS27100A Spectrum Monitor OEM Board

Anritsu Spectrum Analyzers. Frequency range: 9 kHz to 6 GHz, Bandwidth: 20 MHz, Dynamic range: >.

Model
Anritsu MS27100A
Calibration
Available on request
Price
$14,630
RFQ ref
MS27100A
View cart
Prefer to talk? Call +1 (484) 841-9341

This unit

The Anritsu MS27100A Spectrum Monitor OEM Board is a compact spectrum monitoring solution designed for direct integration into OEM systems. Operating from 9 kHz to 6 GHz with sweep speeds up to 24 GHz/s, this board delivers real-time spectrum analysis for interference detection, occupancy monitoring, and regulatory compliance verification. The unit combines exceptional sensitivity with field-deployment durability and remote management capabilities.


Technical Specifications

Frequency Coverage & Performance

  • Frequency range: 9 kHz to 6 GHz

  • Sweep speed: Up to 24 GHz/s

  • Instantaneous FFT bandwidth: 20 MHz

  • IF bandwidth: 20 MHz

  • IF output: 140 MHz

  • Dynamic range: >106 dB (normalized to 1 Hz RBW)

  • DANL: <-150 dBm (1 Hz bandwidth, preamp enabled)

  • SSB phase noise @ 1 GHz: -98 dBc/Hz @ 10 kHz offset Power & Physical

  • Power input: 11 VDC to 24 VDC

  • Power consumption: <11 W

  • Form factor: Compact OEM board Connectivity

  • Gigabit Ethernet for network access

  • USB ports for accessory integration

  • Single RF input port (expandable to six with optional multiplexer, P/N 2000-1894-R)

  • External reference input/output: MCX(f) connectors

  • GPS antenna input: MCX(f) connector


Key Features



  • Integrated web server accessible via Chrome and Firefox for remote control and live measurements

  • Integrated GPS receiver for location tagging and time synchronization

  • IQ block mode and streaming with GPS time-stamping

  • 4 GB internal memory for data storage

  • Watchdog timer for long-term stability in remote deployments

  • Remote firmware update capability

  • SCPI command programmability for system integration


Optional Software & Expansion



  • Vision Software (MX280001A): Interferer geolocation with three or more probes

  • IQ Signal Master (MX280005A): Vector signal analysis for post-processing IQ data

  • RF input multiplexer: Extends RF ports from one to six channels


Typical Applications Interference detection, spectrum occupancy analysis, regulatory compliance monitoring, and field-deployed spectrum surveillance requiring autonomous operation and remote management.

Specifications

ParameterValue
Frequency Range9 kHz to 6 GHz | Power Range (dBm): <-150 dBm | Voltage / Current Range: <11 W, 11 VDC to 24 VDC

Anritsu MS27100A — Repair & Calibration Service

Aumictech offers NIST-traceable calibration and repair for the Anritsu MS27100A. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.

Standard Cal
$450
Pass/fail cert + NIST sticker
Cal with Data
$650
Full NIST cert with measured values

Anritsu MS27100A price

This Anritsu MS27100A is listed at $14,630. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.

Anritsu MS27100A calibration cost

NIST-traceable calibration for the Anritsu MS27100A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →