Fujikura FSM-62S+ Fusion Splicer
The Fujikura FSM-62S+ is a core alignment fusion splicer known for its ruggedness and reliability. It's designed for splicing single-mode and multimode fibers, offering fast splicing and heating times. Ideal for field applications, it features automated functions and a user-friendly interface, ensuring high-quality splices in various environments.
- Model
- Fujikura FSM-62S+
- Calibration
- Available on request
- Price
- $10,180
- Status
- In stock
- RFQ ref
- FSM-62S+
This unit
The Fujikura FSM-62S+ is a core alignment fusion splicer for single-mode and multimode fiber optic splicing in field and installation environments. It delivers 0.02 dB average splice loss on SMF, completes splices in approximately 9 seconds, and protects joints with heat-shrink sleeves in 25 seconds. The splicer features 35× magnification on a 3.5-inch color LCD display, IP52 dust and water resistance, and withstands 76 cm drops onto concrete. Lithium-ion battery supports roughly 200 splice and heat cycles per charge. Data logging to internal memory (100 splices) or USB export enables documentation and analysis of every joint.
Technical Specifications Fiber Alignment & Performance
Core alignment method with applicable fibers: SMF (G.652/G.657), MMF (G.651), DSF (G.655), NZDSF (G.655)
Average splice loss: SMF 0.02 dB, MMF 0.01 dB, DSF/NZDSF 0.04 dB
Splice time: ~9 seconds (SMF/SMF, fast mode)
Heating time: ~25 seconds (60 mm sleeve)
Protection sleeves: 60 mm, 45 mm, micro-sleeve
Electrode life: ~3,000 splices Optical System
Magnification: 35× (X-axis, Y-axis, simultaneous X/Y)
Viewable fiber diameter: 100 µm to 150 µm
Image sensor: CMOS camera
Display: 3.5-inch color LCD Power & Environmental
Battery: Lithium-ion, ~200 splices per charge
AC supply: Direct connection via included adapter
Operating temperature: -10°C to +50°C
Operating humidity: 0% to 95% RH (non-condensing)
Storage temperature: -40°C to +60°C
IP52 rating
Drop resistance: 76 cm onto concrete Physical & Interface
Dimensions: 180 mm (W) × 150 mm (D) × 157 mm (H)
Weight: ~2.5 kg (with battery)
Data transfer: USB port for logging and firmware updates
Key Features
Automated wind cover and fiber position adjustment
Internal memory stores up to 100 splice results with USB export capability
Compact, field-portable design with carrying case
Supplied with fiber cleaver, stripper, spare electrodes, and battery pack
Typical Applications Telecommunications network installation and maintenance, data center fiber deployment, field splicing operations, and cable repair work requiring consistent low-loss joints and rapid heat cycles.
Compatibility & Integration Accepts 60 mm and 45 mm protection sleeves. USB interface enables data retrieval and firmware updates across installations.
Fujikura FSM-62S+ — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Fujikura FSM-62S+. Calibration covers arc calibration (arc power and duration), V-groove alignment verification, cleave angle detection accuracy, splice loss estimation accuracy, and heating oven temperature calibration. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Fujikura FSM-62S+ faults: electrode wear, V-groove contamination or chipping, motor alignment drift, high arc voltage errors. Common repairs include electrode replacement (typically every 2,000-3,000 arcs), V-groove cleaning or replacement, motor and actuator alignment, and camera/CCD replacement. Fujikura FSM and Sumitomo Type series parts are stocked.
Fujikura FSM-62S+ price
This Fujikura FSM-62S+ is listed at $10,180. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Fujikura FSM-62S+ calibration cost
NIST-traceable calibration for the Fujikura FSM-62S+ is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers arc calibration (arc power and duration), V-groove alignment verification, cleave angle detection accuracy, splice loss estimation accuracy, and heating oven temperature calibration. Turnaround is 1 to 3 business days after receipt. See full calibration details →
