Fujikura 90R Ribbon Fiber Fusion Splicer
Fujikura Fusion Splicers.
- Model
- Fujikura 90R
- Calibration
- Available on request
- Price
- $2,679
- Status
- In stock
- RFQ ref
- 90R
This unit
The Fujikura 90R is a ribbon fiber fusion splicer engineered for high-volume precision splicing of single fibers, standard encapsulated ribbons, and SpiderWeb Ribbon® (SWR) fibers. Purpose-built for data centers, telecommunications, and enterprise networks, the 90R automates splicing operations across 12-fiber and 16-fiber ribbon configurations while delivering consistent low splice loss and rapid cycle times.
Technical Specifications Splicing Performance:
Fiber alignment via self-cladding alignment using melting surface tension (passive, non-active core alignment)
Compatible with single-mode (SM) and multi-mode (MM) fibers: ITU-T G.652, G.651, G.657
Supports 12-fiber and 16-fiber ribbon configurations plus single-fiber splicing
Accommodates 200 µm and 250 µm coated fiber spacing with field-replaceable, switchable V-groove system
Average splice loss: G.652 0.05 dB, G.651 0.02 dB, G.657 0.05 dB average Splice & Heat Timing:
SM FAST mode splice time: 11–12 sec
SM AUTO mode splice time: 16–17 sec or 19–20 sec
FP-05 heat time (40 mm): 38–40 sec
FP-04T heat time (40 mm): 17–19 sec or 17–18 sec
Single fiber heat time (60 mm): 13–15 sec
Single fiber heat time (40 mm): 14–16 sec
Electrode life: approximately 1,500 splices Display & Interface:
4.9-inch or 5.0-inch color TFT display
Key Features
Passive surface-tension alignment eliminates active core alignment complexity
Single platform handles ribbons and individual fibers
Field-replaceable V-groove modules enable rapid fiber pitch conversion
Fiber holder FH-70-12 supports 0.3 mm and 0.4 mm encapsulated ribbons, 200 µm and 250 µm SWR
Pitch conversion holder (FH-70-12PC) converts 200 µm to 250 µm spacing
Typical Applications Data center backbone splicing, high-density ribbon deployments, telecommunications infrastructure, enterprise fiber-to-the-building installations, and multi-fiber mass-termination projects.
Compatibility & Integration Works with G.652, G.651, and G.657 standard fiber types. Fiber holder ecosystem accommodates multiple ribbon geometries and coated fiber diameters, enabling flexible deployment across mixed fiber inventories.
Fujikura 90R — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Fujikura 90R. Calibration covers arc calibration (arc power and duration), V-groove alignment verification, cleave angle detection accuracy, splice loss estimation accuracy, and heating oven temperature calibration. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Fujikura 90R faults: electrode wear, V-groove contamination or chipping, motor alignment drift, high arc voltage errors. Common repairs include electrode replacement (typically every 2,000-3,000 arcs), V-groove cleaning or replacement, motor and actuator alignment, and camera/CCD replacement. Fujikura FSM and Sumitomo Type series parts are stocked.
Fujikura 90R price
This Fujikura 90R is listed at $2,679. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Fujikura 90R calibration cost
NIST-traceable calibration for the Fujikura 90R is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers arc calibration (arc power and duration), V-groove alignment verification, cleave angle detection accuracy, splice loss estimation accuracy, and heating oven temperature calibration. Turnaround is 1 to 3 business days after receipt. See full calibration details →
