Rohde & Schwarz FSU8 10MHz – 8GHz Spectrum Analyzer
Rohde & Schwarz Spectrum Analyzers. Frequency Range: • Basic unit: 20 Hz to 8 GHz, Bandwidth: • Standard filters: 10 Hz to 50 MHz (1, Bandwidth: 1 Hz to 10 MHz.
- Model
- Rohde & Schwarz FSU8
- Calibration
- Available on request
- Price
- $18,590
- RFQ ref
- FSU8
This unit
The Rohde & Schwarz FSU8 is a spectrum analyzer covering 20 Hz to 8 GHz, purpose-built for RF signal analysis, component characterization, and EMC investigations. It delivers exceptional sensitivity with displayed average noise levels down to –158 dBm (1 Hz bandwidth) and phase noise performance of –160 dBc (1 Hz) at 10 MHz carrier offset. The instrument combines wide dynamic range, flexible resolution bandwidth options from 1 Hz to 50 MHz, and a suite of measurement functions including adjacent channel leakage ratio (ACLR), third order intercept (TOI), and harmonic distortion analysis.
Fast sweep capability - 2.5 ms in frequency domain and 1 µs zero span - enables rapid signal characterization in development and production workflows. External mixer compatibility expands frequency coverage to 110 GHz and beyond, supporting advanced EMC and component testing scenarios.
Technical Specifications
Frequency Range:- Basic unit: 20 Hz to 8 GHz
- With external mixers (R&S FS-Z60/-Z75/-Z90/-Z110): up to 110 GHz and above Sensitivity & Noise Performance:
- Displayed average noise level: –158 dBm (1 Hz bandwidth); –152 dBm at 2 GHz; –148 dBm at 26 GHz
- Phase noise: –160 dBc (1 Hz) at 10 MHz carrier offset; typically –133 dBc (1 Hz) at 10 kHz offset Linearity & Distortion:
- Third order intercept (TOI): typically +25 dBm
- 1 dB compression point: +13 dBm at 0 dB RF attenuation
- Total measurement uncertainty: < 0.3 dB
- Display linearity: 0.1 dB (0 dB to –70 dB) Resolution & Video Bandwidth:
- Standard filters: 10 Hz to 50 MHz (1, 2, 3, 5 steps)
- FFT filters: 1 Hz to 30 kHz
- Channel filters: 100 Hz to 5 MHz (39 available)
- EMI filters: 200 Hz, 9 kHz, 120 kHz, 1 MHz
- Video bandwidth: 1 Hz to 10 MHz Sweep Performance:
- Frequency domain: 2.5 ms
- Time domain (zero span): 1 µs
Key Features
- RMS detector with 100 dB dynamic range; QP detector
- Adjacent channel power measurement (ACLR typically 77 dB for 3GPP)
- Gated sweep, IF power trigger, transducer factor correction
- Peak list marker, spurious emissions measurement, harmonic distortion analysis
- CCDF and APD measurement functions
- Fast ACP measurement in time domain
Typical Applications
- RF component testing and characterization
- Wireless signal analysis (GSM/EDGE, Bluetooth, WCDMA/HSDPA, CDMA2000)
- EMC and spurious emissions investigation
- Phase noise and harmonic distortion measurement
- Production quality validation
Compatibility & Integration Optional application firmware supports GSM/EDGE, Bluetooth, WCDMA/HSDPA/TD-SCDMA, and CDMA2000/1xEV-DV/1xEV-DO modulation analysis. External mixer modules enable millimeter-wave measurements beyond 8 GHz.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 20 Hz to 8 GHz (DC coupled) |
| 1 MHz to 8 GHz (AC coupled) | Power Range (dBm) | −152 dBm to +25 dBm | Voltage / Current Range: Max. 16 A fused supply |
Rohde & Schwarz FSU8 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Rohde & Schwarz FSU8. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Rohde & Schwarz FSU8 price
This Rohde & Schwarz FSU8 is listed at $18,590. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Rohde & Schwarz FSU8 calibration cost
NIST-traceable calibration for the Rohde & Schwarz FSU8 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
