Huntron HSR410
The Huntron HSR410 is a professional-grade robotic access probe designed for automated circuit board testing and diagnostics. It enhances efficiency in locating and probing test points on PCBs, reducing manual labor and improving accuracy. Ideal for high-volume testing and complex circuit analysis.
- Model
- Huntron HSR410
- Calibration
- Available on request
- Price · starting from
- $1,850
- Status
- In stock
- RFQ ref
- HSR410
This unit
The Huntron HSR410 is a switching interface that bridges circuit boards under test with Huntron Trackers to enable IC-level component troubleshooting. By routing signals from both a board under test and a known good reference board through the switcher to the tracker, the HSR410 facilitates rapid comparative analysis without requiring pin-by-pin evaluation. The device features a variable rate controller to adjust comparison switching speed displayed on the Tracker's CRT, making it ideal for in-circuit and out-of-circuit IC diagnostics. It also integrates with general-purpose test equipment for power-on troubleshooting applications.
Technical Specifications
Model: Huntron HSR410
Function: Circuit board component troubleshooting interface
Power Requirements: 8 to 12 Volt DC; 3 Watts maximum
Physical Dimensions: Approximately 26 x 19 x 5 cm
Weight: Approximately 1.08 kg (2.38 lbs)
Key Features
40-pin selection for IC pin-to-pin comparisons
Zero Insertion Force (ZIF) sockets for out-of-circuit component testing
DIP clip cables support in-circuit IC evaluation
Jumper-selectable reference pin configuration for any IC pin
Variable rate controller adjusts switching speed for CRT display optimization
Ref/Alt/Test selection switch for channel routing
EXTERNAL jacks enable integration with multimeters and other test instruments for voltage and current comparison
Instrument selection switch toggles between TRACKER and EXTERNAL test equipment
Typical Applications
IC-by-IC circuit board troubleshooting and failure analysis
In-circuit component testing using DIP clip cables
Out-of-circuit IC validation with ZIF socket interface
Power-on board diagnostics with external test instruments
Compatibility & Integration The HSR410 interfaces primarily with Huntron Tracker 1000 and Huntron Tracker 2000 systems. External test instrument jacks allow connection to multimeters and similar equipment for comparative voltage and current measurements during board troubleshooting.
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | 8 to 12 Volt DC |
Huntron HSR410 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Huntron HSR410. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Huntron HSR410 price
This Huntron HSR410 is listed at $1,850. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Huntron HSR410 calibration cost
NIST-traceable calibration for the Huntron HSR410 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
