Agilent J2127A 10Gb/s Transmission Test Set. Opt 100, 111, 190
Agilent J2127A,Tests 10 Gb/s transmission systems, providing jitter, BER, and compliance verification for SDH/SONET and other high-speed communication links.
- Model
- Agilent J2127A
- Calibration
- Available on request
- Price
- $3,580
- Status
- In stock
- RFQ ref
- J2127A
This unit
The Agilent J2127A 10Gb/s Transmission Test Set is a portable instrument for installation and maintenance of high-speed, multi-service transmission networks. It delivers comprehensive test coverage across SONET, SDH, DSn/PDH, and T-Carrier interfaces with optical rates to 10 Gb/s and integrated multi-port Ethernet testing. The instrument reduces test times and operational costs through unified multi-rate, multi-port, and multi-service architecture.
Technical Specifications
Optical Line Rates:- OC-1, OC-3, OC-12, OC-48, OC-192
- STM-0, STM-1, STM-4, STM-16, STM-64 Electrical Line Rates (Optional):
- DS1 (1.5 Mb/s), DS3 (45 Mb/s), 2 Mb/s, 8 Mb/s, 34 Mb/s, 140 Mb/s Optical Interface Options:
- Option 100: 1310 nm (rates to 2.5 Gb/s)
- Option 111: 1550 nm high-sensitivity optics (rates to 10 Gb/s) Ethernet Testing (Option #323):
- Eight 10/100BASE-T ports and two 1000BASE-X ports operating simultaneously
- Physical layer and Layer 2 testing: throughput, latency, frame loss
- Automated RFC 2544 compliance testing
Key Features SONET/SDH Capabilities:
- Dual-standard simultaneous testing
- All-channel monitoring of up to 192 STS/AU channels for errors, alarms, and pointer activity
- Automatic line rate and channel structure discovery
- VT/TU channel monitoring within selected STS/AU
- Path trace message identification and routing error detection DSn/PDH Testing:
- Unframed, framed, and structured (mux/demux) modes
- Error and alarm generation/detection
- 56 kb/s, n × 56 kb/s, 64 kb/s, and n × 64 kb/s testing
- Drop/insert capability from/to SONET/SDH Measurements and Analysis:
- Optical power and electrical level
- Line frequency, pointer activity, service disruption
- Round trip delay and pulse mask analysis
- Performance metrics: G.826, G.828, G.821, M.2100, M.2101, M.2101.1, M.2110, M.2120
- Intrusive and non-intrusive through-mode testing
Typical Applications Transmission network installation, maintenance, and troubleshooting across SONET/SDH, PDH, and Ethernet infrastructure.
Compatibility & Integration Supports multi-service testing across T-Carrier, DSn/PDH, SONET/SDH, and Ethernet networks in single portable platform.
Specifications
| Parameter | Value |
|---|---|
| Wavelength Range | 1310 nm, 1550 nm |
Agilent J2127A — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Agilent J2127A. Calibration covers optical reference power levels, electrical signal amplitude calibration, protocol layer verification, and BER measurement floor validation. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Agilent J2127A faults: SFP cage mechanical damage, optical port contamination, firmware corruption. Most failures involve SFP/SFP+ cage mechanical damage, optical port contamination, or firmware corruption. Port cleaning and firmware restoration resolve the majority of faults.
Agilent J2127A price
This Agilent J2127A is listed at $3,580. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Agilent J2127A calibration cost
NIST-traceable calibration for the Agilent J2127A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers optical reference power levels, electrical signal amplitude calibration, protocol layer verification, and BER measurement floor validation. Turnaround is 1 to 3 business days after receipt. See full calibration details →
