JDSU JD746B CellAdvisor RF Analyzer, 4 GHz
The JDSU JD746B CellAdvisor RF Analyzer is a comprehensive tool for cell site testing. It offers frequency coverage up to 4 GHz, enabling technicians to accurately measure and analyze RF signals, perform interference analysis, and validate the performance of cellular networks. Its rugged design and user-friendly interface make it ideal for field use.
- Model
- JDSU JD746B
- Calibration
- Available on request
- Price
- $3,480
- RFQ ref
- JD746B
This unit
The JDSU JD746B CellAdvisor RF Analyzer is a portable, field-deployable instrument for installation and maintenance of 2G to 4G wireless cell sites. It integrates spectrum analysis, cable and antenna testing, RF power measurement, and signal generation into a single rugged platform. The analyzer features an intuitive interface with built-in help, outdoor display mode for sunlit environments, and USB/Ethernet connectivity for efficient data transfer.
Technical Specifications
Spectrum Analyzer- Frequency range: 100 kHz to 4 GHz
- Frequency span: 0 Hz (zero span) to 4 GHz, 1 Hz resolution
- Resolution bandwidth: 1 Hz to 3 MHz (1-3-10 sequence), ±10% accuracy
- Video bandwidth: 1 Hz to 3 MHz (1-3-10 sequence), ±10% accuracy
- Displayed average noise level (preamplifier off): –140 dBm typical (10 MHz to 2.3 GHz); –138 dBm typical (>2.3 to 3 GHz); –135 dBm typical (>3 to 4 GHz)
- Displayed average noise level (preamplifier on): –155 dBm typical (10 MHz to 2.3 GHz); –153 dBm typical (>2.3 to 3 GHz); –150 dBm typical (>3 to 4 GHz)
- Measurement range: DANL to +20 dBm
- Input attenuator: 0 to 50 dB in 5 dB steps
- Maximum input level: +20 dBm average continuous power; ±50 V DC
- SSB phase noise (1 GHz, 10 kHz RBW): <–90 dBc/Hz @ 30 kHz offset; <–95 dBc/Hz @ 100 kHz offset; <–102 dBc/Hz @ 1 MHz offset
- Trigger sources: Free run, video, external
- Gate length: 1 µs to 100 ms; gate delay 0 to 100 ms
- Trigger delay range: 0 to 200 s (6 µs resolution) Cable and Antenna Analyzer
- Frequency range: 5 MHz to 4 GHz
- Resolution: 10 kHz; accuracy ±25 ppm + aging
- Data points: 126, 251 RF Power Meter
- Frequency range: 10 MHz to 4 GHz
- Measurements: Absolute and relative power (dBm, watts) with real-time analog meter and histogram trend display
Key Features
- Interference analysis with spectrogram and RSSI display
- Channel scanner for simultaneous multi-channel analysis
- CW signal generator for field testing
- RFoCPRI™ remote CPRI signal testing to reduce site climbs
- Integrated GPS receiver for location-tagged analysis
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 100 kHz to 4 GHz | Power Range (dBm): '-140 dBm to +20 dBm | Voltage / Current Range: ±50 V DC (maximum input) |
JDSU JD746B — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the JDSU JD746B. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
JDSU JD746B price
This JDSU JD746B is listed at $3,480. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
JDSU JD746B calibration cost
NIST-traceable calibration for the JDSU JD746B is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →