Agilent/Keysight L2067XA

The Keysight L2067XA is a LAN-connected wide dynamic range peak and average power sensor engineered for precision RF power measurement across microwave and millimeter-wave frequencies. Operating from 10 MHz to 67 GHz with measurement speeds up to 50,000 readings/sec, this sensor delivers zero dead time for continuous pulse characterization and supports both peak and average power modes with full dynamic range selectivity. The instrument features single-shot real-time capture at 20 Msample/sec with long memory storage of 1M samples, internal zero and automatic calibration, and built-in radar and wireless presets for standard signals including DME, GSM, EDGE, WCDMA, WLAN, and LTE.

Technical Specifications

• Frequency Range: 10 MHz to 67 GHz


• Power Range: −70 dBm to +20 dBm (10 MHz to 50 GHz); −70 dBm to +15 dBm (>50 GHz to 54 GHz); −70 dBm to +10 dBm (>54 GHz to 67 GHz)


• Connector: 1.85 mm male


• Measurement Speed: Up to 50,000 readings/sec


• Video Bandwidth: 5 MHz


• Sampling Rate: 20 Msample/sec (single-shot real-time); 1 Msample/sec (variable)


• Data Storage: 1M samples long memory


• Connectivity: LAN (PoE via 802.3at or 802.3af compliant injector, not included)

Key Features

• Zero dead time real-time measurement for uninterrupted pulse acquisition


• Time-selectivity function enables full dynamic range for average power and time-selective average measurements


• Built-in trigger in/out for synchronization and sequencing


• Internal calibration with zero offset correction


• Standard 5 ft (1.5 m) sensor cable; optional lengths to 200 ft available


• Included BNC trigger cables (two, 50 Ω, 1.5 m each)

Typical Applications

• Pulsed RF and radar signal characterization


• Wireless communications power monitoring (GSM, LTE, WLAN)


• High-frequency component and system validation


• Manufacturing test environments requiring automated data logging

Compatibility & Integration

• Supported by Keysight BenchVue software (BV0007B license included) for instrument control, data logging, and automated test sequences without programming


• Application development environment support via LabVIEW Instrument Driver Import/Export Wizards


• Keysight U281A waveguide-to-coaxial adapter compatible for transmission line conversion to 50 Ω


• WEEE Directive compliant; designed for indoor use in low-condensation environments