Adlink / Ampro Computers LB3-486-Q-91 Single Board System
Adlink / Ampro Computers Embedded Test Systems.
- Model
- Adlink / Ampro Computers LB3-486-Q-91
- Calibration
- Available on request
- Price
- $1,950
- Status
- In stock
- RFQ ref
- LB3-486-Q-91
This unit
The Adlink/Ampro Computers LB3-486-Q-91 is a PC/AT compatible single board computer engineered for embedded systems requiring compact form factor and integrated functionality. This system consolidates the capabilities of a full PC/AT motherboard with multiple expansion interfaces within a 5.25-inch disk drive envelope, delivering processing power and I/O density for space-constrained applications.
Technical Specifications
Processor & Memory- AMD 486DX4/DX5 CPU operating at 66 MHz or 100/133 MHz
- OPTi 82C465MV/A/B single-chip mixed-voltage chipset
- Up to 64 Mbytes system RAM (Fast Page or EDO DRAM via two 72-pin SIMM slots)
- 512 KByte or 1 MByte onboard display RAM (soldered)
- Award ROM-BIOS with shadow RAM support Storage & Mass Media
- IDE interface supporting 1–2 drives with PIO mode 4 transfer rates
- Adaptec AIC-6360 SCSI controller (SCSI I/II, synchronous and asynchronous)
- Onboard DiskOnChip2000™ flash SSD socket
- Two 32-pin byte-wide memory sockets accepting 32K–1M byte EPROMs, flash, SRAM, or NOVRAM
- Floppy disk support for 1–2 drives Communications & Networking
- Four FIFO-buffered serial ports (16550 equivalent) with full handshaking; RS232C or RS485 capable
- Bidirectional EPP/ECP parallel port
- IEEE 802.3 Ethernet interface (SMC 9000 series, 10 Mbits/sec)
- 10Base-T RJ45 and AUI header connectors Display & Video
- Chips & Technologies 65545 display controller
- CRT, LCD, and EL display support
- 24-bit true color at 640 × 480 resolution for flat panel displays
- GUI accelerator for graphics performance
- DPMS-compatible display support with programmable LCD timing I/O & Control
- Standard PC/AT keyboard port
- 15 interrupt channels (8259 equivalent)
- 0.1 watt speaker output
- 512-bit CONFIG EEPROM for OEM customization
Key Features
- Integrated single board design eliminates discrete card stack complexity
- Mixed-voltage 3.3V chipset architecture
- Onboard battery-backed SRAM to NOVRAM conversion
- Flexible storage: IDE, SCSI, flash SSD, and floppy combinations
- Flat panel LCD support with sequenced power protection
- Quad serial port configuration with dual protocol options
Typical Applications Industrial control systems, medical instrumentation, telecommunications equipment, point-of-sale terminals, and other embedded platforms requiring PC/AT compatibility within physical and thermal constraints.
Compatibility & Integration Full PC/AT architectural compatibility ensures software and driver compatibility with standard operating systems and development tools. The design supports legacy and modern storage interfaces, display technologies, and communication protocols through onboard controllers and connectors.
Adlink / Ampro Computers LB3-486-Q-91 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Adlink / Ampro Computers LB3-486-Q-91. Calibration covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Adlink / Ampro Computers LB3-486-Q-91 faults: power supply failure (cRIO-9073/9074), C-series slot connector wear, PXI chassis fan failure, GPIB interface failure on VXI controllers, BIOS/EEPROM corruption. NI CompactRIO most common faults are power supply failure on older cRIO-9073/9074 chassis and C-series module slot connector wear from repeated hot-swap cycles. PXI chassis fan failure is the most common wear item — chassis fans are field-replaceable. VXI embedded controllers most commonly develop EEPROM corruption and GPIB interface failure.
Adlink / Ampro Computers LB3-486-Q-91 price
This Adlink / Ampro Computers LB3-486-Q-91 is listed at $1,950. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Adlink / Ampro Computers LB3-486-Q-91 calibration cost
NIST-traceable calibration for the Adlink / Ampro Computers LB3-486-Q-91 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. Turnaround is 1 to 3 business days after receipt. See full calibration details →
