JDS Uniphase MAPB+1E-Z003
JDS Uniphase Optical Light Sources. Model: MAPB+1E-Z003.
- Model
- JDS Uniphase MAPB+1E-Z003
- Calibration
- Available on request
- Price
- $1,100
- Status
- In stock
- RFQ ref
- MAPB+1E-Z003
This unit
The JDS Uniphase MAPB+1E-Z003 is a broadband optical source module engineered for C-band testing and measurement applications in optical communication systems. This cassette-based instrument delivers configurable output power across the 1527 to 1568 nm wavelength range with exceptional stability and isolation characteristics. Available in 20 mW, 50 mW, and 100 mW configurations, the module integrates into the MAP platform's hot-swappable architecture for flexible instrumentation deployment.
Technical Specifications
Wavelength Range: 1527 to 1568 nm (C-band)
Output Power Options: 20 mW, 50 mW, or 100 mW at 1550 nm (23 °C, post one-hour warm-up)
Spectral Gain Flatness: 1.6 dB maximum (1529 to 1565 nm)
Output Power Stability: 0.02 dB
Output Isolation: 45 dB minimum
Operating Temperature: 0 to 50 °C
Storage Temperature: −30 to 60 °C
Humidity: Maximum 95% RH non-condensing (0 to 45 °C)
Physical Dimensions: 4.06 cm W × 13.24 cm H × 39.5 cm D
Weight: 2.3 kg
Key Features
Configurable output power in three standard levels
Flat spectral response across C-band operational window
Dual remote control interfaces: RS-232 and GPIB
Hot-swappable cassette design - no system power-down required for installation or removal
Automatic cassette identification via dynamic MAP firmware
Local control via 9-key keypad and color display on mainframe
Typical Applications Component and system characterization within optical networks. Suitable for broadband light source requirements in optical test environments.
Compatibility & Integration Designed for the JDS Uniphase MAP series mainframes: 19-inch 8-slot Master (MAP+2M00) or 9.5-inch 3-slot Benchtop (MAP+2B00). Integrates with over 15 instrumentation cassette types within the MAP ecosystem.
Specifications
| Parameter | Value |
|---|---|
| Wavelength Range | 1527 to 1568 nm |
JDS Uniphase MAPB+1E-Z003 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the JDS Uniphase MAPB+1E-Z003. Calibration covers output power at specified wavelengths, wavelength accuracy, 15-minute output stability, and modulation frequency accuracy where applicable. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common JDS Uniphase MAPB+1E-Z003 faults: laser diode end-of-life (output below spec), fiber output connector damage, output instability. Common repairs include laser diode replacement when output falls below spec, fiber output connector repair, and thermal management service.
JDS Uniphase MAPB+1E-Z003 price
This JDS Uniphase MAPB+1E-Z003 is listed at $1,100. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
JDS Uniphase MAPB+1E-Z003 calibration cost
NIST-traceable calibration for the JDS Uniphase MAPB+1E-Z003 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers output power at specified wavelengths, wavelength accuracy, 15-minute output stability, and modulation frequency accuracy where applicable. Turnaround is 1 to 3 business days after receipt. See full calibration details →
