JDSU MAPL-1T1FA MAP Tunable Laser Source, C+L Band

The JDSU MAPL-1T1FA MAP Tunable Laser Source delivers precise wavelength control across the C+L band (1519 to 1630 nm) for optical testing and component characterization. This modular laser integrates into the JDSU MAP-200 platform, supporting LXI-compliant Ethernet connectivity and IVI automation drivers. Built for DWDM system analysis, optical amplifier testing, fiber component validation, and laboratory research, It has stable, repeatable output with wavelength accuracy to ±15 pm in enhanced mode. ## Technical Specifications • Wavelength Range: 1519 to 1630 nm (C+L band); C-band 191.0 to 196.25 THz (1527.60 to 1569.59 nm) • Output Power Setting Range: 7 to 13 dBm; typical >12 dBm (C-band), >10.5 dBm (L-band); peak 8.0 dBm • Spectral Linewidth: ≤5 MHz • Side-Mode Suppression Ratio: 40 dB minimum • Wavelength Accuracy: ±15 pm (enhanced mode), ±60 pm (regular mode) • Wavelength Stability: ±3 pm typical (1 hr), ±10 pm (24 hrs) • Wavelength Repeatability: ±3 pm typical (enhanced mode) • Wavelength Resolution: 1 pm • Tuning Speed: 1 to 100 nm/s • Power Stability: 0.01 dB (1 hr) • Fiber Output: Polarization maintaining fiber, polarization aligned to slow axis ## Key Features • Wavelength accuracy to ±15 pm supports precision DWDM characterization and component alignment • Tuning speed range of 1–100 nm/s accommodates both fast wavelength scanning and slow stabilization protocols • Low spectral linewidth (≤5 MHz) and 40 dB SMSR enable high-resolution optical measurements • Polarization-maintaining fiber output with aligned slow-axis polarization ## Typical Applications • DWDM system characterization • Optical amplifier testing • Fiber optic component testing • Manufacturing process testing and component alignment • Optical research and development in laboratory environments ## Compatibility & Integration The MAPL-1T1FA integrates into MAP-220C (two-slot), MAP-230B (three-slot), or MAP-280 (eight-slot) chassis within the JDSU MAP-200 platform. LXI Class C compliance and IVI driver support enable Ethernet or GPIB automation control. CE, CSA/UL, and IEC 61010-1 certification; Class 3B per IEC 60825-1 (2002).