Anritsu MS2034A – Handheld VNA Master Plus, 4 GHz
The Anritsu MS2034A VNA Master Plus is a handheld vector network analyzer that operates up to 4 GHz. It combines a vector network analyzer, spectrum analyzer, and power meter into a single instrument for comprehensive cable and antenna testing.
- Model
- Anritsu MS2034A
- Calibration
- Available on request
- Price
- $5,200
- RFQ ref
- MS2034A
This unit
The Anritsu MS2034A is a handheld vector network analyzer that combines VNA, spectrum analyzer, and power meter functionality in a single portable instrument. Field engineers and technicians use it for cable and antenna characterization, interference detection, and RF system commissioning without requiring multiple benchtop tools.
Technical Specifications Vector Network Analyzer
Frequency range: 2 MHz to 4 GHz
2-port vector network analysis with 1-port and 1-path 2-port measurement modes
Return Loss, VSWR, Cable Loss, Distance-To-Fault, and Smith Chart measurements
S-parameter measurement (S11, S21) with vector correction
Cable loss, phase, and group delay analysis
Transmission measurements at High (0 dBm) and Low (-35 dBm) output power
Sweep speed: 2 ms/data point
VNA dynamic range: 70 dBm maximum
Transmission dynamic range: 100 dB Spectrum Analyzer
Frequency range: 9 kHz to 4 GHz
Spectrum monitoring, interference analysis, and signal characterization
Field strength, occupied bandwidth, channel power, and adjacent channel power ratio measurements
Integrated AM/FM/SSB demodulator for signal identification
Phase noise measurement capability (typical -110 dBc/Hz at 10 kHz offset)
Dynamic range: 100 dB
Optional spectrogram measurements for intermittent interference detection (Option 25) Power Meter
Frequency range: 10 MHz to 4 GHz
Measurement range: -50 to +20 dBm
Display range: -80 to +80 dBm
Absolute power display in dBm or Watts; relative power in dB or %
Built-in auto-averaging and zeroing for low-power accuracy
Optional external detector support up to 50 GHz with Anritsu 560 series detectors
Optional high-accuracy power meter mode (Option 19) with external sensors
Key Features
High-resolution, daylight-viewable TFT color display
Handheld form factor for field deployment
Single instrument replaces multiple benchtop analyzers
Error correction for directivity and source match
Typical Applications
Cable fault location and characterization
Antenna return loss and VSWR verification
RF interference source identification and monitoring
Component S-parameter measurement
System power level verification and commissioning
Compatibility & Integration External power detectors (Anritsu 560 series) enable measurements to 50 GHz. Optional sensors PSN50 and MA24106A support enhanced power measurement accuracy.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 2 MHz to 4 GHz (VNA) |
| 10 MHz to 4 GHz (Power Meter) | Power Range (dBm) | '-50 to +20 dBm (measurement range) |
Anritsu MS2034A — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Anritsu MS2034A. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Anritsu MS2034A price
This Anritsu MS2034A is listed at $5,200. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Anritsu MS2034A calibration cost
NIST-traceable calibration for the Anritsu MS2034A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
