Anritsu MS2037C – VNA Master; 5 kHz to 15 GHz (with Spectrum Analysis to 9 GHz)
Anritsu MS2037C,Multifunction handheld unit combining vector network and spectrum analysis from 5 kHz to 15 GHz. Field-ready tool for advanced RF and microwave diagnostics.
The Anritsu MS2037C is a two-port Vector Network Analyzer integrating spectrum analysis capabilities, designed for field-based RF and microwave diagnostics from 5 kHz to 15 GHz. This handheld instrument measures all four S-parameters (S11, S21, S22, S12) using a 3-receiver architecture, eliminating the need for multiple connections during VNA testing. The 12-term error correction algorithm - in handheld VNA design - supports reciprocal through calibration and delivers dynamic range to 100 dB across 4,001 points per sweep at 350 µs per point.
Dual-mode operation combines VNA functionality with spectrum analysis extending to 15 GHz, offering occupied bandwidth, channel power, ACPR, C/I ratio, emission mask, and PIM hunting measurements. Powered by internal battery for up to 3 hours autonomous operation, the instrument connects via dual USB and Ethernet (10/100 Mbps) interfaces. Distance-to-fault and time-domain measurements are native capabilities.
An optional GPS module (Option 31) locks frequency accuracy to <25 ppb and maintains 50 ppb stability for 72 hours post-lock. The internal Bias-Tee option (Option 10) enables active component testing. A compact 315 × 211 × 97 mm frame and 4.8 kg weight support installation and field troubleshooting workflows without sacrificing measurement precision.
Specifications
Parameter
Value
Frequency Range
5 kHz to 15 GHz (VNA)
9 kHz to 15 GHz (spectrum analyzer) | Power Range (dBm)
'-161 dBm to +30 dBm | Voltage / Current Range: 12 VDC to 14.5 VDC @ <5.0 A
Anritsu MS2037C — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Anritsu MS2037C.
All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
This Anritsu MS2037C is listed at $13,500. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Anritsu MS2037C calibration cost
NIST-traceable calibration for the Anritsu MS2037C is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
