Anritsu MS2038C VNA Master Handheld Analyzer 20GHz
Anritsu Spectrum Analyzers. Frequency Range: ** 5 kHz to 20 GHz, Dynamic Range: ** Up to 100 dB, Frequency Range: ** 9 kHz to 20 GHz.
- Model
- Anritsu MS2038C
- Calibration
- Available on request
- Price
- $15,500
- RFQ ref
- MS2038C
This unit
The Anritsu MS2038C VNA Master is a, handheld instrument combining a vector network analyzer (VNA) and a spectrum analyzer. This multi-function device works with comprehensive signal analysis in field applications, offering advanced capabilities for testing and maintaining wireless communication systems, broadcast equipment, and other RF applications. It has accurate, vector-corrected 2-port magnitude, phase, and Distance-To-Fault (DTF) measurements, suitable for complex coaxial and waveguide measurement needs.
Technical Specifications Vector Network Analyzer (VNA) Capabilities: * Frequency Range: 5 kHz to 20 GHz
- Number of Ports: 2
- Measured Parameters: S11, S21, S22, S12
- Measurement Speed: 350 µs per data point
- Points on Graph: Up to 4,001
- Dynamic Range: Up to 100 dB; 106 dBm
- Source Power: +3 dBm or -25 dBm
- Directivity: >42 dB up to 6 GHz, >36 dB from >6 GHz to 20 GHz
- Calibration: Manual using calibration loads; Supports Reciprocal Through Calibration types (SOLR, SSLR, SSSR)
- Error Correction: 12-term error correction algorithm
- Measurement Architecture: True 2-path, 2-port fully-reversing VNA
- S-Parameter Measurement: Measures all four S-parameters with a single connection to the DUT due to a 3-receiver architecture
- Time Domain Analysis: Available with gating options, including Gated Time Domain, LP Processing, and Phasor Impulse mode
- Distance Domain Measurements: Standard Distance-To-Fault (DTF) measurements (requires firmware V1.16 or higher)
- Vector Voltmeter Option: Available for cable phase matching
- Waveguide Measurements: Supported by all models Spectrum Analyzer Capabilities: * Frequency Range: 9 kHz to 20 GHz
- Amplitude: Up to +30 dBm
- Noise Floor: Down to -161 dBm (with preamplifier)
- RBW (Resolution Bandwidth): 1 Hz to 10 MHz
- Capture Bandwidth: 30 MHz
- Detectors: Peak, Negative, Sample, Quasi-peak, and True RMS
- Markers: 6, each with a Delta Marker, or 1 Reference with 6 Deltas
- Pre-selector: Built-in for eliminating spurious responses
- Modulation Analyzer Option: AM/FM/PM
- Interference Analyzer Option: Spectrogram, Signal Strength, RSSI General Specifications: * Screen Size: 21.3 cm (800 × 600)
- Autonomous Operation Time (Battery): 3 hours
- Weight: 4.8 kg
- Dimensions: 315 × 211 × 97 mm
- Operating Temperature: -10°C to +55°C
- Interfaces: USB, Ethernet
Why Choose Aumictech for Anritsu MS2038C?
At Aumictech, we specialize in supplying RF and microwave test equipment. Whether you need precise S-parameter analysis in the field, comprehensive spectrum monitoring, or accurate cable and antenna testing, our team ensures the Anritsu MS2038C delivers maximum performance for your application.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 5 kHz to 20 GHz (VNA) |
| 9 kHz to 20 GHz (Spectrum Analyzer) | Power Range (dBm) | '-25 dBm to +3 dBm (VNA source) |
Anritsu MS2038C — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Anritsu MS2038C. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Anritsu MS2038C price
This Anritsu MS2038C is listed at $15,500. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Anritsu MS2038C calibration cost
NIST-traceable calibration for the Anritsu MS2038C is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
