Anritsu MS2720T – Spectrum Master Spectrum and Interference Analyzer
Anritsu Spectrum Analyzers. Frequency Range: 9 kHz to 9 GHz (MS2720T-0709), Dynamic Range: >, Accuracy: ±0.5 dB typical.
- Model
- Anritsu MS2720T
- Calibration
- Available on request
- Price
- $16,500
- RFQ ref
- MS2720T
This unit
The Anritsu MS2720T Spectrum Master is a portable spectrum and interference analyzer engineered for signal identification, characterization, and quality assessment across wireless communication systems. Operating from 9 kHz to 9 GHz, 13 GHz, 20 GHz, 32 GHz, or 43 GHz depending on model configuration, the instrument delivers DANL as low as –164 dBm in 1 Hz RBW at 1 GHz with preamplifier enabled and dynamic range exceeding 106 dB in 1 Hz RBW at 2.4 GHz. Fast sweep speeds - up to 100 times faster than conventional modes - combined with Burst Detect™ capture of transients as short as 200 μs enable efficient field deployment in signal monitoring, broadcast proofing, and site maintenance.
Technical Specifications
- Frequency Range: 9 kHz to 9 GHz (MS2720T-0709), 13 GHz (MS2720T-0713), 20 GHz (MS2720T-0720), 32 GHz (MS2720T-0732), or 43 GHz (MS2720T-0743)
- DANL: –164 dBm in 1 Hz RBW @ 1 GHz (preamplifier ON); –160 dBm in 1 Hz RBW @ 1 GHz (standard)
- Dynamic Range: > 106 dB in 1 Hz RBW @ 2.4 GHz
- Phase Noise: –112 dBc/Hz @ 10 kHz offset at 1 GHz (typical –108 dBc/Hz; minimum –102 dBc/Hz)
- Amplitude Accuracy: ±0.5 dB typical
- Frequency Accuracy: ±25 ppb (GPS ON); ±1 ppm/year (GPS OFF); ±0.3 ppm @ 25 °C ±25°C plus aging
- Resolution Bandwidth: 1 Hz to 10 MHz
- Video Bandwidth: 1 Hz to 10 MHz
- Signal Analysis Bandwidth: 20 MHz (optional)
- Input Attenuation: 0 to 65 dB in 5 dB steps
- Maximum Safe Input Level: +43 dBm
- Display: 21.3 cm touchscreen, 800 × 600 resolution
- Connectors: N (f) for 9–20 GHz models; ruggedized K(m) for 32–43 GHz models
Key Features
- Multiple sweep modes: Fast, Performance, No FFT, Burst Detect™
- Burst Detect™ captures transients as short as 200 μs
- Zero span measurement with 10 MHz RBW and VBW
- Gated sweep support (Option 90)
- Occupied bandwidth, channel power, ACPR, C/I, emission mask, spurious emissions, and field strength measurement
- Spectrogram and signal strength analysis
- AM/FM/PM demodulation (Option 509)
- High accuracy power measurement with USB power sensors to 26 GHz (Option 19)
Typical Applications
- Signal monitoring and interference identification in cellular and broadband networks
- Broadcast signal verification and compliance proofing
- Site commissioning, maintenance, and troubleshooting
- Field strength mapping and RSSI measurements
Connectivity & Integration
- USB and Ethernet ports for data transfer and remote control
- Supports GSM/GPRS/EDGE, W-CDMA/HSPA+, LTE/LTE-A FDD/TDD, NB-IoT, TD-SCDMA, CDMA/EV-DO, and WiMAX demodulation with applicable options
- User interface available in English and Russian
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 13 GHz (MS2720T-0713), 20 GHz (MS2720T-0720), 32 GHz (MS2720T-0732), 9 kHz to 9 GHz (MS2720T-0709), or 43 GHz (MS2720T-0743) | Power Range (dBm): '-164 dBm to +43 dBm |
Anritsu MS2720T — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Anritsu MS2720T. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Anritsu MS2720T price
This Anritsu MS2720T is listed at $16,500. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Anritsu MS2720T calibration cost
NIST-traceable calibration for the Anritsu MS2720T is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
