Anritsu MS2721B – 9kHz-7.1GHz Handheld Spectrum Analyzer
Anritsu Spectrum Analyzers. Dynamic Range: >, Accuracy: ±0.5 dB typical, Accuracy: ±0.3 ppm (25°C ±25°C) + long-term drift.
- Model
- Anritsu MS2721B
- Calibration
- Available on request
- Price
- $5,500
- RFQ ref
- MS2721B
This unit
The Anritsu MS2721B is a handheld spectrum analyzer delivering continuous frequency coverage from 9 kHz to 7.1 GHz for RF and microwave signal analysis across field and bench environments. Weighing less than 7 pounds, it combines portability with measurement capability including spectrum monitoring, interference analysis, wireless network testing, and broadcast proofing.
Technical Specifications
Frequency Coverage- 9 kHz to 7.1 GHz continuous Signal Sensitivity & Dynamic Range
- Displayed Average Noise Level (DANL): −163 dBm typical in 1 Hz RBW
- Dynamic Range: > 101 dB in 1 Hz RBW
- Phase Noise: −100 dBc/Hz @ 10 kHz offset (100 kHz to 7.1 GHz)
- Amplitude Accuracy: ±0.5 dB typical
- Frequency Accuracy: ±0.3 ppm (25°C ±25°C) + long-term drift; 101 dB) for simultaneous small and large signal measurement
- Fast sweep times enabling rapid field assessment
Typical Applications
- Spectrum monitoring and regulatory compliance
- Interference identification and characterization
- Wireless network coverage verification
- Broadcast signal proofing and quality assurance
- In-field RF troubleshooting and signal analysis
Compatibility & Integration
- Accepts external trigger inputs for synchronized measurement
- Supports multiple sweep trigger modes for automated and manual operation
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 9 kHz to 7.1 GHz | Power Range (dBm): '-163 dBm (DANL typical, 1 Hz RBW) to +30 dBm (maximum continuous input) |
Anritsu MS2721B — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Anritsu MS2721B. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Anritsu MS2721B price
This Anritsu MS2721B is listed at $5,500. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Anritsu MS2721B calibration cost
NIST-traceable calibration for the Anritsu MS2721B is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
