Anritsu MS2722C
Anritsu Spectrum Analyzers. Frequency range: 9 kHz to 9 GHz, Accuracy: ±25 ppb with GPS On, Bandwidth: 1 Hz to 10 MHz.
- Model
- Anritsu MS2722C
- Calibration
- Available on request
- Price
- $7,500
- RFQ ref
- MS2722C
This unit
The Anritsu MS2722C Spectrum Master is a handheld spectrum analyzer delivering wireless signal analysis across 9 kHz to 9 GHz. Engineered for field and laboratory deployment, it combines continuous frequency coverage with rugged construction, daylight-visible 8.4-inch display, and rapid measurement capability. The instrument weighs 7.8 lb with battery and reaches operating readiness in less than 5 minutes.
Technical Specifications Frequency & Accuracy
Frequency range: 9 kHz to 9 GHz
Frequency accuracy: ±25 ppb with GPS On
Resolution bandwidth: 1 Hz to 10 MHz
Phase noise: -100 dBc/Hz @ 10 kHz offset at 1 GHz Dynamic Performance
Dynamic range: > 104 dB in 1 Hz RBW
Display average noise level (DANL): -160 dBm in 1 Hz RBW (preamplifier on)
Amplitude measurement range: +30 dBm to -160 dBm
Detector types: Peak, Negative, Sample, Quasi-peak, true RMS Measurement Capabilities
Spectrum analysis: Occupied Bandwidth, Channel Power, ACPR, C/I, Emission Masks
Interference analysis: Spectrogram, Signal Strength, RSSI, Mapping
Trace modes: Normal, Max Hold, Min Hold, Average (configurable count)
Markers: Six independent or one reference with six delta markers
Limit lines: Up to 40 segments with one-button envelope creation
Demodulation: AM, FM, SSB audio with optional modulation parameter analysis (Option 509)
Burst detection: 200 μs capture capability
Zero-Span: 10 MHz RBW/VBW, 30 MHz wide zero-span IF output at 140 MHz center frequency
Key Features
Internal preamplifier providing broadband coverage across full frequency range
Three sweep modes (Fast, Performance, No FFT) with up to 100× speed improvement
Advanced triggering: hysteresis, hold-off, and delay options
Trace save-on-event: Configurable for limit line crossing or sweep completion
Audio waveform oscilloscope display
Display options: Normal, black and white, night vision, high contrast readability modes
Optional GPS receiver for geo-tagging and enhanced frequency accuracy
Optional high accuracy power meter
Optional channel scanner
Signal Standards Support
LTE, TD-LTE, GSM/EDGE
W-CDMA/HSPA+, TD-SCDMA/HSPA+
CDMA, EV-DO
Fixed and Mobile WiMAX
3GPP and 3GPP2 signal analyzers
Typical Applications
Spectrum monitoring and interference analysis
RF and microwave measurements
Regulatory compliance and emissions testing
Wireless communication system and component validation
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 9 kHz to 9 GHz | Power Range (dBm): '+30 dBm to -160 dBm |
Anritsu MS2722C — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Anritsu MS2722C. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Anritsu MS2722C price
This Anritsu MS2722C is listed at $7,500. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Anritsu MS2722C calibration cost
NIST-traceable calibration for the Anritsu MS2722C is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
