Anritsu MU909014A1 – µOTDR Module, Single Wavelength, 30 dB Class OTDR With VLD For MT9090A Network Master Series Mainframes
The Anritsu MU909014A1 is a single-wavelength µOTDR module designed for use with MT9090A Network Master series mainframes. It is a 30 dB class OTDR with a built-in Visual Fault Locator (VLD), ideal for short-range fiber optic testing and troubleshooting in various network environments.
- Model
- Anritsu MU909014A1
- Calibration
- Available on request
- Price
- $1,800
- Status
- In stock
- RFQ ref
- MU909014A1
This unit
The Anritsu MU909014A1 is a single-wavelength µOTDR module designed for integration with MT9090A Network Master series mainframes. This 30 dB class OTDR incorporates a Visual Fault Locator (VLD) for precise fiber optic link characterization, event detection, and fault localization in telecommunications and enterprise network environments. The module delivers rapid trace acquisition, automatic event analysis, and accurate loss measurement across configurable fiber lengths.
Technical Specifications Optical Performance
Dynamic Range: 30 dB class
Event Dead Zone: Typically < 0.8 m
Attenuation Dead Zone: Typically < 4.5 m
Sampling Resolution: Up to 0.05 m
Distance Accuracy: ±1 m ± (distance × 5 × 10⁻⁵)
Refractive Index: Settable 1.30000 to 1.70000 (0.00001 increment steps) Visual Fault Locator
Output Power: 1 mW (Class II Laser)
Wavelength: 650 nm
Modes: Continuous wave (CW) and modulated output
Application: Visual identification of macrobends, breaks, and faulty connectors Connectivity
Optical Connector: APC or UPC type
Data Transfer: Via MT9090A mainframe interfaces (USB, Ethernet)
Power: Supplied by MT9090A mainframe
Key Features
Automatic detection and characterization of splices, connectors, and breaks
Link loss and splice loss measurement capability
Reflective event measurement
Standard trace file format support (.sor)
Multiple pulse widths for optimized resolution and measurement range
Internal data storage via mainframe integration
Typical Applications
Short-range fiber optic link troubleshooting
Fiber network verification and acceptance testing
Event localization in installed optical infrastructure
Connector and splice quality assessment
Enterprise and telecommunications network diagnostics
Compatibility & Integration The MU909014A1 module slots directly into Anritsu MT9090A Network Master series mainframes. Operation and data management occur through the mainframe's native communication interfaces and software environment.
Anritsu MU909014A1 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Anritsu MU909014A1. Calibration covers distance accuracy verified against a calibrated fiber length reference, event loss measurement accuracy at splice and connector events, dead zone (event and attenuation) at rated pulse width, dynamic range verification at 1310 nm and 1550 nm, backscatter coefficient calibration, and return loss measurement accuracy. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Anritsu MU909014A1 faults: optical port connector damage or contamination, battery failure, display damage from field use, module failure on FTB or MTS platforms, calibration drift. Most field OTDRs fail due to physical damage. On modular platforms (EXFO FTB, Viavi MTS), individual module failures are serviced without replacing the entire mainframe. Optical port cleaning resolves many apparent measurement faults before mechanical repair is needed.
Anritsu MU909014A1 price
This Anritsu MU909014A1 is listed at $1,800. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Anritsu MU909014A1 calibration cost
NIST-traceable calibration for the Anritsu MU909014A1 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers distance accuracy verified against a calibrated fiber length reference, event loss measurement accuracy at splice and connector events, dead zone (event and attenuation) at rated pulse width, dynamic range verification at 1310 nm and 1550 nm, backscatter coefficient calibration, and return loss measurement accuracy. Turnaround is 1 to 3 business days after receipt. See full calibration details →
