Innocor JDSU TestPoint TS-10 N550-0221-08, N55-022X
Innocor/JDSU/TestPoint Embedded Test Systems.
- Model
- Innocor/JDSU/TestPoint N550-0221-08/N55-022X
- Calibration
- Available on request
- Price
- $4,930
- Status
- In stock
- RFQ ref
- N550-0221-08/N55-022X
This unit
The Innocor JDSU TestPoint TS-10 (N550-0221-08, N55-022X) is a fixed-interface network testing platform engineered for field diagnostics across Ethernet, Fibre Channel, and SONET/SDH infrastructures. This lightweight, portable chassis delivers accurate protocol validation and troubleshooting with a design optimized for technician mobility.
Technical Specifications
Environmental- Operating Temperature: 0°C to +40°C
- Storage Temperature: -20°C to +60°C
- Humidity: 5% to 95% non-condensing
- EMC Compliance: CE Mark Class A Mechanical Robustness
- Shock (IEC 60068-2-27 & 29): 15 G, 1/2 sine, 11 ms duration (three shocks per axis, three axes, power off)
- Bumps (IEC 60068-2-27 & 29): 15 G, 1/2 sine, 6 ms duration (1,000 jolts per axis, three axes, power off)
- Drop (IEC 721-3-7): 50 cm drop height onto plywood (one impact per six sides)
Key Features Ethernet & IP Testing
- Data rates: 10/100/1000 Mb/s, 1 GigE, 10 Gigabit Ethernet (LAN/WAN PHY)
- Connectors: RJ-45 (10/100/1000 Mb/s); FC, SC, ST, LC, DIN (10 Gbps)
- Modes: Terminate, Monitor, Loopback
- Layer 2/3 traffic generation with configurable source/destination IP, VLAN, MPLS, IPv4/IPv6, TCP/UDP
- Layer 2/3 filtering
- BERT support at PCS, MAC, Single/Stacked VLAN, and IPv4 layers
- FEC support: ODU2, OTU2, OTU1e, OTU2e, OTU1f, OTU2f rates with Enhanced FEC (EFEC)
- Single and Dual Port configurations (Dual Port 10 GigE may require two Transport Modules) Fibre Channel Testing
- Data rates: 1G/2G/10G Fibre Channel
- Interface: XFP socket for optical and electrical connectivity
Typical Applications Field protocol validation, network infrastructure diagnostics, WAN/LAN endpoint testing, carrier service verification, and optical transport layer analysis.
Compatibility & Integration The TS-10 fixed configuration integrates within the TestPoint series ecosystem, which includes modular platforms (TS-30, TS-170) for expanded testing flexibility. Support for multiple protocol stacks and transport technologies enables deployment across diverse network environments.
Innocor/JDSU/TestPoint N550-0221-08/N55-022X — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Innocor/JDSU/TestPoint N550-0221-08/N55-022X. Calibration covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Innocor/JDSU/TestPoint N550-0221-08/N55-022X faults: power supply failure (cRIO-9073/9074), C-series slot connector wear, PXI chassis fan failure, GPIB interface failure on VXI controllers, BIOS/EEPROM corruption. NI CompactRIO most common faults are power supply failure on older cRIO-9073/9074 chassis and C-series module slot connector wear from repeated hot-swap cycles. PXI chassis fan failure is the most common wear item — chassis fans are field-replaceable. VXI embedded controllers most commonly develop EEPROM corruption and GPIB interface failure.
Innocor/JDSU/TestPoint N550-0221-08/N55-022X price
This Innocor/JDSU/TestPoint N550-0221-08/N55-022X is listed at $4,930. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Innocor/JDSU/TestPoint N550-0221-08/N55-022X calibration cost
NIST-traceable calibration for the Innocor/JDSU/TestPoint N550-0221-08/N55-022X is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. Turnaround is 1 to 3 business days after receipt. See full calibration details →
