JDS Uniphase OAB1590-20FP0
The JDS Uniphase OAB1590-20FP0 is a fixed optical attenuator designed to reduce the power of an optical signal by a specific amount. This compact attenuator is suitable for various applications in optical communication systems.
- Model
- JDS Uniphase OAB1590-20FP0
- Calibration
- Available on request
- Price
- $6,500
- Status
- In stock
- RFQ ref
- OAB1590-20FP0
This unit
The JDS Uniphase OAB1590-20FP0 is an L-band Erbium-Doped Fiber Amplifier (EDFA) engineered to amplify optical signals across the 1565–1610 nm wavelength range. Optimized for the 1550 nm and 1590 nm test bands, this amplifier delivers high gain and saturated output power while maintaining low noise figure. The OAB1590-20FP0 supports multiple deployment configurations - pre-amplifier, booster, in-line, and mid-span access - making it suitable for DWDM systems, optical communication infrastructure, component manufacturing, and R&D applications.
Technical Specifications
Amplifier Type: L-band EDFA
Operating Wavelengths: 1565–1610 nm
Guaranteed Performance Wavelengths: 1550 nm and 1590 nm (at 23 °C)
Saturated Output Power: Measured at 1590 nm, P_in = 0 dBm (pre-amplifier, in-line, and booster configurations)
Operating Temperature: 0 to 50 °C
Storage Temperature: −40 to 70 °C
Humidity: Maximum 95 % RH non-condensing from 0 to 45 °C
Key Features
Optimized for gain, noise figure, and saturated output power across the L-band
Maximized signal gain and saturated output power in the 1550 nm and 1590 nm bands
Minimized noise figure for high-sensitivity applications
Compact benchtop or rack-mountable design
User-friendly LCD front panel displaying input/output power and current control
Multiple amplification configurations for flexible system integration
Typical Applications
Dense Wavelength Division Multiplexing (DWDM) systems
Long-haul and metro optical communication networks
Optical component and sub-assembly manufacturing
Research and development in fiber-optic signal processing
Compatibility & Integration The OAB1590-20FP0 integrates into systems requiring L-band amplification with specified optical interface options available during procurement (FC/PC, FC/APC, SC/PC, SC/APC configurations). Electrical interface details are specified during system integration.
Specifications
| Parameter | Value |
|---|---|
| Power Range (dBm) | P_in = 0 dBm, Saturated output power measured at 1590 nm | Wavelength Range: 1565–1610 nm (L-band) |
JDS Uniphase OAB1590-20FP0 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the JDS Uniphase OAB1590-20FP0. Calibration covers gain at rated input power across the specified wavelength range, noise figure at rated gain setting, output power accuracy, gain flatness across the C-band or specified wavelength range, and polarization-dependent gain (PDG) where applicable. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common JDS Uniphase OAB1590-20FP0 faults: pump laser diode degradation (gain drop, reduced output power), TEC failure causing thermal drift, optical isolator degradation, power supply failure. The most common failure on any EDFA is pump laser diode degradation. Secondary faults include TEC failure causing thermal runaway, optical isolator degradation, and power supply failure.
JDS Uniphase OAB1590-20FP0 price
This JDS Uniphase OAB1590-20FP0 is listed at $6,500. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
JDS Uniphase OAB1590-20FP0 calibration cost
NIST-traceable calibration for the JDS Uniphase OAB1590-20FP0 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers gain at rated input power across the specified wavelength range, noise figure at rated gain setting, output power accuracy, gain flatness across the C-band or specified wavelength range, and polarization-dependent gain (PDG) where applicable. Turnaround is 1 to 3 business days after receipt. See full calibration details →
