ILX Lightwave OMH-6735B – InGaAs Wavehead
ILX Lightwave Optical Power Sensors. Model: OMH-6735B.
- Model
- ILX Lightwave OMH-6735B
- Calibration
- Available on request
- Price
- $1,550
- Status
- In stock
- RFQ ref
- OMH-6735B
This unit
The ILX Lightwave OMH-6735B is an InGaAs optical power measurement head designed for near-infrared spectral detection in optical measurement systems. It integrates an InGaAs detector with integrating sphere technology to deliver accurate optical power measurements across diverse optical configurations while eliminating common measurement errors from detector saturation, alignment sensitivity, beam profile variation, polarization effects, and back reflection.
Technical Specifications
- Detector Type: InGaAs
- Measurement Spectrum: Near-infrared
- Calibration Standard: NIST traceable
- Operating Temperature: 0 °C to 40 °C
- Storage Temperature: −40 °C to 70 °C
- Maximum Relative Humidity: <80% RH, non-condensing
- Maximum Altitude: 3000 m (9843 ft.)
- Mains Voltage Tolerance: ±10% nominal
- Safety Classification: Class I Equipment (grounded type)
- Pollution Degree: II
- Overvoltage Category: II for transient overvoltages
- Environmental: Indoor use only; not protected against moisture ingress
Key Features
- Integrating sphere-based measurement topology simplifies optical power detection across varying beam profiles and alignment tolerances
- Eliminates polarization-dependent measurement errors and back reflection artifacts
- solid detector saturation mitigation enables reliable measurements across extended dynamic ranges
- NIST-traceable calibration ensures measurement traceability and accuracy
- Suitable for continuous operation within specified environmental limits
Typical Applications
- Optical power verification in telecommunications and fiber-optic systems
- Near-infrared power measurements in laboratory and production test environments
- Precision optical power characterization where alignment and polarization independence are critical
Compatibility & Integration The OMH-6735B integrates directly with the ILX Lightwave OMM-6810B Optical Power and Wavelength Meter, forming a complete optical measurement solution for near-infrared applications.
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | ±10% nominal mains supply voltage | Wavelength Range: Near-infrared spectrum |
ILX Lightwave OMH-6735B — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the ILX Lightwave OMH-6735B. Calibration covers detector responsivity across all specified wavelengths (typically 800-1700 nm range), absolute power accuracy, and EEPROM calibration coefficient update. Compatible with Agilent/HP 8163A/B, 8164A/B, and 8166A/B mainframes.. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common ILX Lightwave OMH-6735B faults: FC/PC connector damage, EEPROM failure (mainframe shows unrecognized sensor), reduced responsivity. Common faults include FC/PC input connector damage, EEPROM failure causing the module to appear unrecognized by the mainframe, and reduced detector responsivity from contamination.
ILX Lightwave OMH-6735B price
This ILX Lightwave OMH-6735B is listed at $1,550. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
ILX Lightwave OMH-6735B calibration cost
NIST-traceable calibration for the ILX Lightwave OMH-6735B is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers detector responsivity across all specified wavelengths (typically 800-1700 nm range), absolute power accuracy, and EEPROM calibration coefficient update. Compatible with Agilent/HP 8163A/B, 8164A/B, and 8166A/B mainframes.. Turnaround is 1 to 3 business days after receipt. See full calibration details →
