Kikusui PAD55-35L
Kikusui DC Power Supplies. Model: PAD55-35L.
- Model
- Kikusui PAD55-35L
- Calibration
- Available on request
- Price
- $1,450
- Status
- In stock
- RFQ ref
- PAD55-35L
This unit
The Kikusui PAD55-35L is a regulated DC power supply engineered for demanding industrial and laboratory applications requiring precise voltage and current control. This unit delivers 0–55V and 0–35A, providing 1925W rated power across benchtop and integrated system environments. The PAD55-35L combines dual CV/CC operation modes with advanced regulation stability, low output ripple, and comprehensive protection architecture to safeguard connected loads during testing, development, and quality control workflows.
Technical Specifications
Output Range: 0–55V / 0–35A
Rated Power: Approximately 1925W
Line Regulation (CV): ≤0.5% + 1mV (typ.)
Line Regulation (CC): ≤1% + 3mA (typ.)
Load Regulation (CV): ≤3% + 3mV (typ.)
Load Regulation (CC): ≤2% + 2mA (typ.)
Output Ripple (CV): ≤8mVrms (typ.)
Output Noise (CC): ≤1mA (typ.)
Temperature Coefficient: 50ppm/°C with minimal aging drift
Transient Response: Wide-band error amplifier with stable frequency gain and phase characteristics
Key Features
Constant Voltage and Constant Current dual-mode operation with front-panel observable setpoint values
Standard Overvoltage Protector (OVP) with front-panel adjustable voltage threshold and 50ms operating pulse width
Optional high-speed thyristor crowbar OVP (200µs pulse width) for semiconductor-sensitive loads
Choke input rectifier filter system reduces line harmonic distortion and improves input power factor, particularly at low output voltages
Premium component selection and forced-air cooling deliver excellent temperature stability and minimal time-dependent drift
Typical Applications
Component and subsystem functional testing
Power supply design and validation
Load characterization across wide voltage and current ranges
Burn-in and reliability qualification testing
Compatibility & Integration AC input voltage is field-configurable; refer to the specific unit and manual for your voltage setting and corresponding fuse rating. Power delivery uses a 3-core cable with designated Line, Neutral, and Ground conductors. Units configured for 125V AC or higher input may be supplied with the AC plug detached; installation of a suitable plug is required before operation.
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | 0–35A, 0–55V |
Kikusui PAD55-35L — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Kikusui PAD55-35L. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Kikusui PAD55-35L price
This Kikusui PAD55-35L is listed at $1,450. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Kikusui PAD55-35L calibration cost
NIST-traceable calibration for the Kikusui PAD55-35L is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
