Abaco Systems / SBS PCI-5565PIORC-110000 Reflective Memory PCI Node Card - RoHS Compliant
PCI Reflective Memory Node Card, RoHS Compliant.
- Model
- Abaco Systems / SBS PCI-5565PIORC-110000
- Calibration
- Available on request
- Price
- $3,599
- Status
- In stock
- RFQ ref
- PCI-5565PIORC-110000
This unit
The Abaco Systems PCI-5565PIORC-110000 is a RoHS-compliant Reflective Memory PCI Node Card engineered for deterministic, low-latency data sharing across distributed embedded systems. The card enables transparent memory synchronization across up to 256 networked nodes with zero processor overhead, eliminating the need for traditional inter-system communication protocols. Its architecture operates independently of operating system and bus topology, enabling heterogeneous hardware platforms to function as a unified shared-memory network.
Technical Specifications
- Interface: PCI 64-bit, 66 MHz; 3.3V or 5.0V logic levels; 32-bit compatible
- Network Connectivity: High-speed fiber-optic via 2.12 Gbaud serial link
- Fiber Reach: Multimode to 300 m; single-mode to 10 km
- Memory Capacity: 128 Mbyte or 256 Mbyte SDRAM
- Data Transfer Rate: 43 Mbyte/s (4-byte packets) to 174 Mbyte/s (64-byte packets)
- Packet Size: 4 to 64 bytes, dynamically configurable
- DMA Channels: One independent channel
- Operating Temperature: 0°C to +65°C with forced air cooling
Key Features
- Transparent data writes replicate across all network nodes automatically
- Configurable endian conversion for mixed-architecture networks
- Low-latency, deterministic packet delivery with ring or star topology support
- Dual transmit/receive FIFOs buffer peak-rate traffic for host optimization
- Any-to-any or broadcast interrupt generation across nodes
- Built-in error detection and redundant transfer mode support
- Field-upgradable firmware for runtime updates
Typical Applications Multi-system real-time data acquisition, distributed control networks, deterministic avionics and defense subsystem integration, high-speed industrial process synchronization.
Compatibility & Integration Universal 64-bit/32-bit PCI add-in card rated for both 3.3V and 5.0V PCI buses. Supports ring and star network topologies for flexible deployment in legacy and modern platforms.
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | 3.3V or 5.0V |
Abaco Systems / SBS PCI-5565PIORC-110000 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Abaco Systems / SBS PCI-5565PIORC-110000. Calibration covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Abaco Systems / SBS PCI-5565PIORC-110000 faults: power supply failure (cRIO-9073/9074), C-series slot connector wear, PXI chassis fan failure, GPIB interface failure on VXI controllers, BIOS/EEPROM corruption. NI CompactRIO most common faults are power supply failure on older cRIO-9073/9074 chassis and C-series module slot connector wear from repeated hot-swap cycles. PXI chassis fan failure is the most common wear item — chassis fans are field-replaceable. VXI embedded controllers most commonly develop EEPROM corruption and GPIB interface failure.
Abaco Systems / SBS PCI-5565PIORC-110000 price
This Abaco Systems / SBS PCI-5565PIORC-110000 is listed at $3,599. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Abaco Systems / SBS PCI-5565PIORC-110000 calibration cost
NIST-traceable calibration for the Abaco Systems / SBS PCI-5565PIORC-110000 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. Turnaround is 1 to 3 business days after receipt. See full calibration details →
