Abaco Systems PCIE-5565RC-200000 PCI Express (PCIe) Reflective Memory (RFM) Node Interface Card
PCI Express (PCIe) Reflective Memory (RFM) Node Interface Card
- Model
- Abaco Systems PCIE-5565RC-200000
- Calibration
- Available on request
- Price
- $7,560
- Status
- In stock
- RFQ ref
- PCIE-5565RC-200000
This unit
The Abaco Systems PCIE-5565RC-200000 is a PCI Express node interface card that implements Reflective Memory (RFM) technology for deterministic, low-latency data sharing across distributed systems. The card creates an optical ring-based shared memory network where data written to onboard memory is automatically broadcast to all connected nodes with minimal host processor overhead. This transparent data transfer mechanism eliminates I/O bottlenecks and optimizes system performance for real-time applications requiring sub-microsecond inter-node latency.
Technical Specifications
- Form Factor: PCI Express (PCIe), low profile
- Network Topology: Optical ring-based shared memory
- Maximum Nodes: Up to 256
- Onboard Memory: 128 MB or 256 MB SDRAM
- Sustained Data Rate: Up to 170 MB/s
- Serial Connection Speed: 2.12 Gbaud
- Inter-Node Latency: 450–500 nanoseconds
- Packet Size: 4 to 64 bytes (dynamic)
- Fiber Optic Range: Multimode up to 300 m; single mode up to 10 km
- DMA Channels: One independent channel
- Interface Standard: PCI Express 1.0a to PCI Bridge, PCI Local Bus Specification v2.2
- Compliance: RoHS
Key Features
- Software-transparent operation with no I/O overhead
- Interrupt generation capability: any node can trigger interrupts to single or multiple targets
- Transmit and Receive FIFOs buffer peak-rate data
- Built-in error detection and management
- Multi-platform OS support: Linux, VxWorks, Windows
- Independent operation across different bus structures and operating systems
Typical Applications
- Real-time data distribution in distributed avionics and defense systems
- Low-latency inter-process communication across multiple chassis
- Deterministic memory sharing in time-critical embedded environments
- Ring-topology sensor networks requiring microsecond-level synchronization
Compatibility & Integration The card integrates into PCI Express slots via standard PCIe connector. High-speed optical fiber links support both multimode and single-mode deployments for flexible network distances.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 2.12 Gbaud |
Abaco Systems PCIE-5565RC-200000 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Abaco Systems PCIE-5565RC-200000. Calibration covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Abaco Systems PCIE-5565RC-200000 faults: power supply failure (cRIO-9073/9074), C-series slot connector wear, PXI chassis fan failure, GPIB interface failure on VXI controllers, BIOS/EEPROM corruption. NI CompactRIO most common faults are power supply failure on older cRIO-9073/9074 chassis and C-series module slot connector wear from repeated hot-swap cycles. PXI chassis fan failure is the most common wear item — chassis fans are field-replaceable. VXI embedded controllers most commonly develop EEPROM corruption and GPIB interface failure.
Abaco Systems PCIE-5565RC-200000 price
This Abaco Systems PCIE-5565RC-200000 is listed at $7,560. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Abaco Systems PCIE-5565RC-200000 calibration cost
NIST-traceable calibration for the Abaco Systems PCIE-5565RC-200000 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. Turnaround is 1 to 3 business days after receipt. See full calibration details →
