Abaco Systems / VMIC VMICPCI-7055-322100 CompactPCI Single Board Computer
Abaco Systems / VMIC Embedded Test Systems. CompactPCI Single Board Computer.
- Model
- Abaco Systems / VMIC VMICPCI-7055-322100
- Calibration
- Available on request
- Price · starting from
- $5,499
- Status
- In stock
- RFQ ref
- VMICPCI-7055-322100
This unit
The Abaco Systems VMICPCI-7055-322100 is a single-slot, 6U CompactPCI Single Board Computer engineered for embedded systems. Built around the IBM 750GX PowerPC processor running at up to 1.0 GHz and the Marvell Discovery III chipset, this passively cooled board delivers reliable performance in demanding environments. It supports up to 1 GB of DDR 400 SDRAM with ECC and optional 2 GB CompactFlash storage via Ultra DMA IDE controller.
Technical Specifications
- Processor: IBM 750GX PowerPC, up to 1.0 GHz
- Chipset: Marvell Discovery III
- Memory: Up to 1 GB DDR 400 SDRAM with ECC
- Storage: Up to 2 GB CompactFlash option with Ultra DMA IDE Controller
- CompactPCI Bus: 64-bit/66 MHz (PICMG 2.0 Rev. 3.0 compliant) with universal signaling
- PMC Expansion: Dual sites supporting 64-bit/100 MHz PCI-X, backward compatible to 5V/33 MHz PCI
- Networking: Three 10/100/1000BaseTX Gigabit Ethernet ports (one front panel, two via J3 connector with PICMG 2.16 support)
- Serial Interfaces: Three ports - one RS232 (COM0) front panel, two RS232/422/485 (COM1, COM2) via J3
- Watchdog Timer: User programmable
- Power Supply: +3.3 VDC (1.7 A typical, 3.04 A max), +5 VDC (3.2 A typical, 6.0 A max), ±12 VDC (50 mA max)
- Operating Temperature: 0°C to +55°C
- MTBF: 361,616 hours
Key Features
- Status LEDs for IDE activity, board status, power, hot swap, and LAN activity
- Front panel reset switch and serial/Ethernet access
- PICMG 2.9 Rev. 1.0 (IPMI), PICMG 2.1 Rev. 2.0 (hot swap), PICMG 2.0 Rev. 3.0 compliance
- Supports both system controller and peripheral SBC roles
- RoHS compliant
Typical Applications Critical infrastructure, telecommunications, military/aerospace systems, industrial control, and distributed embedded computing where reliability and passive cooling are essential.
Compatibility & Integration Runs VxWorks and Linux. Rear Transition Module VMIACC-7055 or ACC-7055RC enables secondary IDE and hard disk support. Dimensions: 9.2 in × 6.3 in × 0.8 in (233.4 mm × 160 mm × 20.3 mm).
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | '+3.3 VDC (1.7 A typical, +5 VDC (3.2 A typical, ±12 VDC (50 mA max), 3.04 A max), 6.0 A max) |
Abaco Systems / VMIC VMICPCI-7055-322100 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Abaco Systems / VMIC VMICPCI-7055-322100. Calibration covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Abaco Systems / VMIC VMICPCI-7055-322100 faults: power supply failure (cRIO-9073/9074), C-series slot connector wear, PXI chassis fan failure, GPIB interface failure on VXI controllers, BIOS/EEPROM corruption. NI CompactRIO most common faults are power supply failure on older cRIO-9073/9074 chassis and C-series module slot connector wear from repeated hot-swap cycles. PXI chassis fan failure is the most common wear item — chassis fans are field-replaceable. VXI embedded controllers most commonly develop EEPROM corruption and GPIB interface failure.
Abaco Systems / VMIC VMICPCI-7055-322100 price
This Abaco Systems / VMIC VMICPCI-7055-322100 is listed at $5,499. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Abaco Systems / VMIC VMICPCI-7055-322100 calibration cost
NIST-traceable calibration for the Abaco Systems / VMIC VMICPCI-7055-322100 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. Turnaround is 1 to 3 business days after receipt. See full calibration details →
