Abaco Systems / VMIC PMC-5565PIORC-210000 Reflective Memory PMC Node Card - RoHS Compliant
Reflective Memory PMC Node Card - RoHS Compliant
- Model
- Abaco Systems / VMIC PMC-5565PIORC-210000
- Calibration
- Available on request
- Price
- $3,499
- Status
- In stock
- RFQ ref
- PMC-5565PIORC-210000
This unit
The Abaco Systems / VMIC PMC-5565PIORC-210000 is a RoHS-compliant Reflective Memory PMC Node Card engineered for deterministic, low-latency data sharing across distributed systems. Operating as a PCI Mezzanine Card, it enables up to 256 independent nodes to exchange data transparently, with writes to onboard memory automatically mirrored across the network. No host processor overhead is required for network operation, making it ideal for real-time applications demanding hardware-transparent synchronization.
Technical Specifications
- Form Factor: PMC (PCI Mezzanine Card)
- Network Architecture: Reflective Memory (RFM)
- Maximum Nodes: Up to 256
- Serial Communication Speed: 2.12 Gbaud
- Data Transfer Rate: 43 Mbyte/s (4-byte packets) to 170 Mbyte/s (64-byte packets)
- Packet Size: Configurable, 4 to 64 bytes
- Onboard Memory: 128 MB or 256 MB SDRAM configurations
- Fiber Optic Reach: Multimode up to 300 m; single-mode up to 10 km
- Latency: Deterministic, typical < 500 ns
- Power Consumption: 5 W typical
- Power Supply: +3.3 VDC
- Operating Temperature: -40°C to +85°C (industrial grade)
- Wavelength: 850 nm (multimode fiber, ST/LC connectors)
Key Features
- PCI bus compatibility: 32-bit/33 MHz or 64-bit/66 MHz (3.3V or 5V logic)
- Interrupt generation to any node or broadcast to all nodes with single command
- Error detection with optional redundant transfer mode for enhanced suppression
- Software-transparent operation eliminates I/O overhead
- Fully RoHS compliant
Typical Applications Industrial control, real-time simulation, automated test systems, and high-speed data acquisition requiring synchronized multi-system operation.
Compatibility & Integration Requires PMC/PMI carrier (e.g., Abaco 2BARCBD1). Compatible with VME/VXI/PCI/CompactPCI systems. Supported on Linux, VxWorks, Windows RTX, Windows 2000, and Windows XP platforms.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 2.12 Gbaud | Voltage / Current Range: '+3.3 VDC, 5 W typical | Wavelength Range: 850 nm |
Abaco Systems / VMIC PMC-5565PIORC-210000 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Abaco Systems / VMIC PMC-5565PIORC-210000. Calibration covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Abaco Systems / VMIC PMC-5565PIORC-210000 faults: power supply failure (cRIO-9073/9074), C-series slot connector wear, PXI chassis fan failure, GPIB interface failure on VXI controllers, BIOS/EEPROM corruption. NI CompactRIO most common faults are power supply failure on older cRIO-9073/9074 chassis and C-series module slot connector wear from repeated hot-swap cycles. PXI chassis fan failure is the most common wear item — chassis fans are field-replaceable. VXI embedded controllers most commonly develop EEPROM corruption and GPIB interface failure.
Abaco Systems / VMIC PMC-5565PIORC-210000 price
This Abaco Systems / VMIC PMC-5565PIORC-210000 is listed at $3,499. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Abaco Systems / VMIC PMC-5565PIORC-210000 calibration cost
NIST-traceable calibration for the Abaco Systems / VMIC PMC-5565PIORC-210000 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. Turnaround is 1 to 3 business days after receipt. See full calibration details →
