Abaco Systems / Ramix PMC663 Dual 10/100baseTX PMC Ethernet Controller
Dual 10/100baseTX PMC Ethernet Controller
- Model
- Abaco Systems / Ramix PMC663
- Calibration
- Available on request
- Price · starting from
- $1,050
- Status
- In stock
- RFQ ref
- PMC663
This unit
The Abaco Systems / Ramix PMC663 is a PCI Mezzanine Card (PMC) that delivers dual 10/100BaseTX Ethernet interfaces for network interconnects. Two independent 10/100BaseTX engines support full-duplex operation at 100 Mbps and 10 Mbps. An integrated DMA engine with deep FIFO buffers enables continuous, full-bandwidth data transfer with minimal PCI bus overhead.
A PCI/PCI bridge optimizes performance and reduces host bus loading. Auto-negotiation automatically configures bandwidth and duplex settings for the highest available operating mode. The card complies with IEEE 1386 PMC standards and connects via RJ45 connectors.
Two PMC663 boards directly cabled with a cross-over cable can establish a full-duplex 400 Mbps dedicated data path.
Technical Specifications
- Form Factor: PCI Mezzanine Card (PMC)
- Ethernet Interfaces: Dual 10/100BaseTX
- Ethernet Engines: Two 10/100BaseTX engines
- Operating Modes: 100 Mbps Full Duplex, 10 Mbps Full Duplex
- Physical Connectors: 2 × RJ45
- DMA Engine: Integrated with deep FIFO buffers
- PCI Bridge: Optimized for high performance and low PCI loading
- Operating Temperature: 0 °C to 60 °C
- Storage Temperature: −40 °C to 80 °C
- Relative Humidity: 10% to 90% non-condensing
Key Features
- Auto-negotiation for automatic configuration of bandwidth and full duplex operation
- Direct memory access with substantial buffering for continuous full-bandwidth transfer
- Dual independent Ethernet engines for simultaneous network paths
- Inter-card connectivity: Two units connected via cross-over cable achieve 400 Mbps full-duplex dedicated data path
Typical Applications
- Real-time deterministic networking
- embedded systems requiring dual Ethernet paths
- data interconnects in compact form factors
Compatibility & Integration
- PCI Bus Compliance: IEEE 1386 (PMC) standard
- Software Support: VxWorks, pSOS, LynxOS, Digital Unix
- Host Interface: PCI bus with optimized loading characteristics
Abaco Systems / Ramix PMC663 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Abaco Systems / Ramix PMC663. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Abaco Systems / Ramix PMC663 price
This Abaco Systems / Ramix PMC663 is listed at $1,050. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Abaco Systems / Ramix PMC663 calibration cost
NIST-traceable calibration for the Abaco Systems / Ramix PMC663 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
