Efratom PRFS-202 Rubidium Frequency Standard

Efratom Legacy / Obsolete Test Equipment. Resolution: ** 1E-11, Voltage: ** 115/220 Vac (selectable via internal wiring.

Model
Efratom PRFS-202
Calibration
Available on request
Price · starting from
$2,600
Status
In stock
RFQ ref
PRFS-202
View cart
Prefer to talk? Call +1 (484) 841-9341

This unit

The Efratom PRFS-202 is a portable rubidium frequency standard designed for applications requiring a highly stable and accurate 10 MHz output signal. It is a master oscillator in laboratories, for field calibration services, and for applications demanding precise timing and synchronization. The PRFS-202 utilizes an Efratom FRS-C rubidium atomic oscillator as its core component, ensuring exceptional frequency stability and accuracy.

Technical Specifications Electrical Performance: * Output Frequencies: * 5 MHz sine wave * 10 MHz sine wave * 1 MHz TTL (switchable) * 5 MHz TTL (switchable) * 10 MHz TTL (switchable)

  • Output Level (Sine): 0.85 ± 0.25 Vrms into 50 Ohms
  • Harmonic/Non-Harmonic Distortion (Sine): >30 dBc
  • Frequency Accuracy at Shipment: ±5E-11 (at 25°C)
  • Aging: 5E-11 per month (after 1 month of continuous operation)
  • Frequency Retrace: 5E-11 (after 1 hour power on at 25°C and up to 24 hours power off)
  • Short-Term Stability: * 1E-10, t = 1 sec * 3.16E-11, t ≈ 10 sec * 1E-11, t = 100 sec
  • Trim Range: ±2E-9 nominal
  • Setting Resolution: 1E-11
  • Warm-up Characteristics: <6 minutes to reach 1E-9 at 25°C ambient **Phase Noise (SSB, 1 Hz BW):** * >110 dBc @ 100 Hz from carrier
  • 130 dBc @ 1000 Hz from carrier Power Requirements: * Input Voltage: 115/220 Vac (selectable via internal wiring, but no change required for operation)

  • Input Frequency: 47-400 Hz
  • Power Consumption: ≤25 watts (steady state) Environmental Specifications: * Operating Temperature Range: 0°C to +50°C (ambient)
  • Storage Temperature Range: -40°C to +60°C
  • Altitude: 1E-13/mbar (sea level to 40,000 ft.)
  • Magnetic Field Sensitivity: <4E-13/AM² (worst case); 3E-11/gauss
  • Relative Humidity: 95% (non-condensing)
  • Startup Temperature Limit: Unit will not start up in temperatures below -10°C. Physical Characteristics: * Weight: <15.0 lbs
  • Dimensions: 5.79 in. high x 10.13 in. wide x 11.38 in. long (handle not included) Interfaces: * Output Connectors: BNC female type for sine outputs.
  • Indicators: * Power (Green LED) * Rb Lock (Green LED)
  • Controls: Power ON/OFF switch Included Accessories: * AC line cord, Switchcraft, P/N 91-T-3261-1
  • Fuse - 3A, 250 V, 3AG Slo-Blo Type Optional Accessories: * Spare fuses

Why Choose Aumictech for Efratom PRFS-202? At Aumictech, we specialize in supplying high-end rubidium frequency standard equipment. Whether you need reliable, high-accuracy frequency references, precise timing for critical systems, or stable signal generation for test and measurement, our team ensures the Efratom PRFS-202 delivers maximum performance for your application.

Efratom PRFS-202 — Repair & Calibration Service

Aumictech offers NIST-traceable calibration and repair for the Efratom PRFS-202. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.

Standard Cal
$450
Pass/fail cert + NIST sticker
Cal with Data
$650
Full NIST cert with measured values

Efratom PRFS-202 price

This Efratom PRFS-202 is listed at $2,600. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.

Efratom PRFS-202 calibration cost

NIST-traceable calibration for the Efratom PRFS-202 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →