Advantest R3463 – Spectrum analyzer
The Advantest R3463 is a spectrum analyzer used for measuring the magnitude of an input signal versus frequency within the full frequency range of the instrument. It is a tool to observe the spectral composition of a signal.
- Model
- Advantest R3463
- Calibration
- Available on request
- Price
- $1,495
- RFQ ref
- R3463
This unit
The Advantest R3463 is a modulation spectrum analyzer engineered for digital mobile communication system analysis across 9 kHz to 3 GHz. It combines spectrum analyzer and digital transmission tester modes to deliver signal analysis, component characterization, and EMC measurements in a single instrument.
Technical Specifications
Frequency Range: 9 kHz to 3 GHz Synthesizer Architecture: High-speed settling synthesizer with DDS (Direct Digital Synthesizer) technology minimizes blanking time during narrow-band sweep operations. Measurement Functions- Occupied Bandwidth (OBW)
- Adjacent Channel Power (ACP)
- Harmonic Distortion
- Modulation Accuracy analysis
- Transmission Speed analysis
- Burst envelope and burst spectrum measurements
- Digital Modulation Analysis Function (standard)
- Transient mode for digital transmission analysis
- Automatic standard parameter configuration for PHS, PDC, and NADC (GSM, DCS1800, DCS1900, DECT, CDMA optional) Frequency Performance
- Span Accuracy: 1% or less
- Residual FM: 3 Hz p-p or less (zero span, 0.1 sec)
- Frequency Drift: 20 Hz or less (span ≤ 5 MHz, post 1-hour warm-up)
- Frequency Reference Accuracy: ±2 × 10⁻⁸/day, ±1 × 10⁻⁷/year
- Spectral Purity: <−100 dBc/Hz (10 kHz offset), <−110 dBc/Hz (100 kHz offset) Dynamic Range & Sensitivity
- Dynamic Range: 90 dBc (with 1.7 GHz minimum built-in preselector)
- Maximum Safe Input: +30 dBm (1 W average continuous power, with input ATT ≥ 10 dB)
- Residual Response: <−100 dBm (1 MHz to 3.0 GHz) Distortion & Spurious Performance
- Second Harmonic Distortion: <−70 dBc (10 MHz to 8 GHz)
- Third Order Distortion: <−75 dBc (12.5 kHz separation, 300 Hz RBW, 3 Hz VBW max)
- Image/Multiple Out-of-Band Response: <−70 dBc (10 MHz to 8 GHz)
Key Features
- Selectivity: −5 dBm input mixer level (10 MHz to 3.0 GHz)
Typical Applications Digital mobile communication testing, RF component validation, EMC compliance verification, signal quality assessment, and modulation analysis for wireless systems.
Compatibility & Integration Supports PHS, PDC, NADC protocols. Optional configurations enable GSM, DCS1800, DCS1900, DECT, and CDMA standard measurements with automatic parameter setup.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 9 kHz to 3 GHz | Power Range (dBm): '+30 dBm (max safe input), −100 dBm to −90 dBm (residual response) |
Advantest R3463 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Advantest R3463. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Advantest R3463 price
This Advantest R3463 is listed at $1,495. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Advantest R3463 calibration cost
NIST-traceable calibration for the Advantest R3463 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
