Rohde & Schwarz RTB2004 100MHz Oscilloscope, 4 Channels
Rohde & Schwarz Digital Oscilloscopes. Bandwidth: 100 MHz, Resolution: 8-bit, Accuracy: ± 20 ppm.
- Model
- Rohde & Schwarz RTB2004
- Calibration
- Available on request
- Price
- $3,770
- Status
- In stock
- RFQ ref
- RTB2004
This unit
The Rohde & Schwarz RTB2004 is a 100 MHz, 4-channel digital oscilloscope engineered for education, research, and development environments. It delivers real-time sampling at up to 2.5 GSa/s per channel with 10 Mpts memory depth, enabling detailed capture and analysis of complex waveforms. The 10.1-inch touchscreen display presents signals at 800 × 480 resolution, while 46 automatic measurements and advanced trigger capabilities - including edge, pulse width, video, pattern, and logic triggering - support signal characterization across multiple domains.
Technical Specifications
- Bandwidth: 100 MHz
- Channels: 4
- Real-time sampling rate: Up to 2.5 GSa/s per channel
- Memory depth: Up to 10 Mpts per channel (standard)
- Vertical resolution: 8-bit
- Timebase range: 2 ns/div to 100 s/div
- Timebase accuracy: ± 20 ppm
- Input impedance: 1 MΩ ± 2% in parallel with 15 pF ± 2 pF
- Maximum input voltage: 400 V CAT I (with 10:1 probe)
- Trigger jitter: < 0.5 UIpk-pk (typical)
- Trigger sensitivity: DC Coupled, 1/10th division at 10 MHz
- Display: 10.1-inch color LCD touchscreen, 800 × 480 pixels
- Power consumption: < 50 W
- Dimensions: Approximately 381 mm (W) × 204 mm (H) × 149 mm (D)
- Weight: Approximately 3.5 kg (without accessories)
Key Features
- Acquisition modes: Normal, Average, Peak Detect, Single Shot
- Trigger types: Edge, Pulse Width, Video, Pattern, Logic, Rise/Fall Time, Setup/Hold Time, Window, Runt, Nth Edge
- Automatic measurements: Up to 46
- Waveform math: Add, Subtract, Multiply, Divide, FFT
- FFT analysis: Hanning, Hamming, Blackman, Rectangular window functions
- Input coupling: DC, AC, GND
- Probe compatibility: 10:1, 1:1, 100:1, 1000:1
Interfaces & Integration
- USB Host ports: 2 (front and rear)
- USB Device port: 1 (rear)
- LAN (Ethernet): 1 (rear)
- External trigger input: 1 (front)
- Probe compensation output: 1 (front)
- Serial bus analysis (optional): I2C, SPI, UART/RS-232, CAN, LIN
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 100 MHz | Voltage / Current Range: 400 V CAT I |
Rohde & Schwarz RTB2004 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Rohde & Schwarz RTB2004. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Rohde & Schwarz RTB2004 price
This Rohde & Schwarz RTB2004 is listed at $3,770. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Rohde & Schwarz RTB2004 calibration cost
NIST-traceable calibration for the Rohde & Schwarz RTB2004 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →