Rohde & Schwarz RTO1024 Digital Oscilloscope 2GHz analog bandwidth

The Rohde & Schwarz RTO1024 is a 2 GHz digital oscilloscope engineered for signal acquisition and real-time analysis. This four-channel instrument combines a 10.4-inch XGA touchscreen display with advanced triggering, waveform mathematics, and hardware-accelerated measurements to support demanding debug and validation workflows.

Technical Specifications

• Analog bandwidth: 2 GHz (all four channels)


• Sample rate: Up to 10 Gsample/s per channel


• Memory depth: 80 Msample per channel


• Vertical resolution: Up to 16 bits with High Definition Option


• ENOB: >7.0 bit (full-scale sine wave at or below –3 dB bandwidth)


• Input impedance: 1 MΩ (measured at 500 MHz)


• Input sensitivity: 0.15 mV (measured at 1 mV/div setting) Timing & Synchronization


• Time base range: 25 ps/div to 50 s/div


• Time base accuracy: 2.5 ppm; 0.02 ppm with R&S RTO-B4 option


• Channel deskew: ±100 ns (real-time, channel-to-channel trigger) Trigger System


• Edge, Glitch, Width, Runt, Window, Time-out, Interval, Slew Rate, Data2Clock, Pattern, State, Serial Pattern, I2C, SPI


• Optional: UART/RS-232, LIN, CAN, FlexRay


• Minimum detectable glitch: 100 ps


• Hysteresis: 0.1 div to 5 div (automatic or manual)


• Low trigger jitter; sensitivity <10 mV/div at full bandwidth Acquisition & Analysis


• Acquisition rate: Up to 1,000,000 waveforms/sec


• Hardware-accelerated mathematics: +, –, ×, 1/x, |x|, derivative, log10, ln, log2, scaling, FIR, FFT magnitude


• Hardware-accelerated measurements: amplitude, time, spectrum, histogram, mask test, cursor

Display & Connectivity

• 10.4-inch LC TFT color touchscreen; 1024 × 768 pixels (XGA)


• 1 Gbit/s LAN, 4 × USB 2.0, optional GPIB, DVI for external monitor, external trigger input

Physical

• Dimensions: 427 mm × 249 mm × 204 mm


• Weight: 9.6 kg