Anritsu S332E Site Master Handheld Cable & Antenna Analyzer with Spectrum Analyzer; 2 MHz to 4 GHz
Anritsu Microwave Analyzers. Dynamic range: >, Accuracy: <.
- Model
- Anritsu S332E
- Calibration
- Available on request
- Price
- $8,635
- Status
- In stock
- RFQ ref
- S332E
This unit
The Anritsu S332E Site Master is a handheld cable and antenna analyzer with integrated spectrum analysis, designed for field installation, maintenance, and troubleshooting of wireless infrastructure. It consolidates multiple testing functions - return loss, VSWR, cable loss, distance-to-fault measurements, and spectrum analysis - into a single portable unit weighing 6.0 lbs. The 8.4-inch daylight-viewable color LCD touchscreen supports both field deployment and detailed analysis in the lab or at the tower site.
Technical Specifications Frequency Coverage
Cable & Antenna Analyzer: 2 MHz to 4.0 GHz
Spectrum Analyzer: 9 kHz to 4.0 GHz Physical
Dimensions: 273 mm × 199 mm × 91 mm (10.7 × 7.8 × 3.6 inches)
Weight: 2.71 kg (6.0 lbs)
Display: 8.4-inch color LCD touchscreen, daylight viewable
Power: Rechargeable lithium-ion battery (7500 mAh), 4.5-hour runtime Cable & Antenna Analysis
Return Loss, VSWR, Cable Loss, Distance-To-Fault (return loss and VSWR), Phase, Smith Chart (50/75 Ω)
2-Port transmission measurements: TMA gain and antenna-antenna isolation (high/low power settings)
Sweep speed: 1 msec/data point typical
Calibration: OSL, InstaCal™, FlexCal™ Spectrum Analysis
Dynamic range: > 95 dB (10 Hz RBW)
Display average noise level (DANL): -152 dBm (10 Hz RBW)
Phase noise: -100 dBc/Hz maximum @ 10 kHz offset at 1 GHz
Frequency accuracy: < ±50 ppb with GPS enabled
Occupied bandwidth, channel power, adjacent channel power ratio (ACPR), carrier-to-interference ratio (C/I), spectral emission mask Interference Analysis
Spectrogram display, RSSI, signal ID, three-dimensional frequency/power/time display
Signal mapping with data history storage up to 72 hours
Optional Accessories
Bias Tee: 32 V internal (Option 10)
High-accuracy power meter: ±0.16 dB over wide frequency range (Option 19)
Internal power meter for channelized measurements (Option 29)
GPS receiver for time and location stamping (Option 31)
AM/FM/PM analyzer, EMF test
Typical Applications Wireless infrastructure installation and verification, antenna and transmission line characterization, interference identification and source location, power measurements across 2 MHz to 4.0 GHz, distance-to-fault diagnostics for cable problems.
Anritsu S332E — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Anritsu S332E. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Anritsu S332E price
This Anritsu S332E is listed at $8,635. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Anritsu S332E calibration cost
NIST-traceable calibration for the Anritsu S332E is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
