Kontron SBC-845D-VEA Single Board Computer
Kontron Embedded Test Systems. Model: SBC-845D-VEA.
- Model
- Kontron SBC-845D-VEA
- Calibration
- Available on request
- Price
- $550
- Status
- In stock
- RFQ ref
- SBC-845D-VEA
This unit
The Kontron SBC-845D-VEA is a full-size PICMG single board computer built on the Intel 845D chipset for demanding industrial applications requiring reliable operation in harsh environments. It accommodates Intel Pentium 4 processors up to 2GHz with a 400MHz Front Side Bus, supports up to 2GB of DDR SDRAM with ECC capability, and integrates an ATI M6 3D graphics controller with 16MB dedicated DDR SDRAM. The board provides comprehensive I/O connectivity including Fast Ethernet, three USB ports, two serial ports, parallel port, IrDA, and floppy controller, plus onboard storage interfaces for up to four HDDs via Enhanced PCI IDE with Ultra DMA/33/66/100 support and a Disk-on-Chip socket.
Technical Specifications Processor & Chipset
Intel mPGA478 socket Pentium 4 up to 2GHz with 400MHz FSB
Intel 845D chipset (DDR version) with GMCH and ICH2
Compatible with Pentium 4 (Willamette, Northwood) and Celeron (Willamette-128, Northwood-128) Memory
Two 184-pin DIMM sockets supporting DDR SDRAM up to 2GB
200MHz and 266MHz DDR SDRAM support
ECC memory support available Graphics
ATI M6 3D AGP 4x graphics controller
16MB dedicated DDR SDRAM for display cache
2D hardware acceleration and 3D hyper-pipelined architecture
Motion video acceleration
CRT and dual-channel LVDS/TMDS panel display support Storage
Enhanced PCI IDE supporting up to four HDDs with PIO mode 4 timing
Ultra DMA/33/66/100 synchronous mode
32-pin DIP socket for DiskOnChip 2000 up to 512MB
Key Features
Integrated Intel ICH2 Fast Ethernet (10/100Mb) with Wake On LAN
Three USB ports, two serial ports, one parallel port (SPP/EPP/ECP)
PS/2 keyboard and mouse via 6-pin Mini-DIN connector
IrDA interface and watchdog timer support
PICMG 1.0 compliant with PCI V2.1 bus specification
Proprietary 32-bit PCI extension connector for SCSI and audio modules
ISA bus mastering with 64mA high-drive capability
Typical Applications Industrial control, embedded systems, rugged computing platforms, and modular backplane-based deployments requiring PICMG compliance.
Compatibility & Integration Fully compatible with PICMG 1.0 backplanes and PCI/ISA expansion architecture. Supports legacy peripherals via floppy controller (360k–2.88MB formats) and parallel port modes. DiskOnChip integration provides non-volatile boot storage without mechanical drives.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 200-266MHz DDR SDRAM, 400MHz FSB |
Kontron SBC-845D-VEA — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Kontron SBC-845D-VEA. Calibration covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Kontron SBC-845D-VEA faults: power supply failure (cRIO-9073/9074), C-series slot connector wear, PXI chassis fan failure, GPIB interface failure on VXI controllers, BIOS/EEPROM corruption. NI CompactRIO most common faults are power supply failure on older cRIO-9073/9074 chassis and C-series module slot connector wear from repeated hot-swap cycles. PXI chassis fan failure is the most common wear item — chassis fans are field-replaceable. VXI embedded controllers most commonly develop EEPROM corruption and GPIB interface failure.
Kontron SBC-845D-VEA price
This Kontron SBC-845D-VEA is listed at $550. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Kontron SBC-845D-VEA calibration cost
NIST-traceable calibration for the Kontron SBC-845D-VEA is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. Turnaround is 1 to 3 business days after receipt. See full calibration details →
