Curtiss-Wright / Systran SCRAMNet GT200 PCI-X Card
Curtiss-Wright / Systran Embedded Test Systems.
- Model
- Curtiss-Wright / Systran SCRAMNet GT200
- Calibration
- Available on request
- Price
- $3,200
- Status
- In stock
- RFQ ref
- SCRAMNet GT200
This unit
The Curtiss-Wright/Systran SCRAMNet GT200 PCI-X card delivers high-speed, deterministic data communication for real-time distributed systems. Built on replicated shared-memory architecture, it transfers data across multiple computing platforms with sub-microsecond latency. The card consolidates network control and data streams into a single 2.5 Gbit/s link, eliminating multiple network interfaces and enabling complex simulations, data acquisition, and distributed control without compromising performance.
Technical Specifications
Data Throughput: Exceeds 210 MB/s
Data Transfer Rate: 2.5 Gbit/s
System Latency: Sub-microsecond
Shared Memory: 128 MB dual-port
Ring Topology: Supports up to 256 nodes
Host Interface: PCI-X (33 MHz/66 MHz, 32/64 bit); PMC format available
Optical Media: Industry-standard SFP transceivers
Short wavelength (850 nm): 250 m maximum
Long wavelength (1300 nm): 10 km maximum
Signaling Voltages: 3.3 V or 5 V PCI
Memory Buffering: Insertion and transmit/receive FIFOs prevent data collisions
Interrupts: Selectable local host interrupts; broadcast and unicast network interrupts for node synchronization
Key Features
Concurrent network and host memory access without flow control overhead
Multiple transceiver options: shortwave multi-mode and longwave single-mode with optional redundancy
Available in standard and conduction-cooled rugged form factors
Operates with LinkXchange family switches (2.5 Gbps or faster)
Cross-platform interoperability across diverse computing architectures
Operating System Support Linux, Windows, VxWorks, Solaris, RTX, IRIX, MATLAB, and LabVIEW.
Compatibility & Integration Variations interoperate completely on the link interface, functioning as a unified multi-processor system regardless of host platform. The architecture supports both broadcast and unicast signaling for distributed control and synchronization across networked nodes.
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | '+3.3V, +5V |
Curtiss-Wright / Systran SCRAMNet GT200 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Curtiss-Wright / Systran SCRAMNet GT200. Calibration covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Curtiss-Wright / Systran SCRAMNet GT200 faults: power supply failure (cRIO-9073/9074), C-series slot connector wear, PXI chassis fan failure, GPIB interface failure on VXI controllers, BIOS/EEPROM corruption. NI CompactRIO most common faults are power supply failure on older cRIO-9073/9074 chassis and C-series module slot connector wear from repeated hot-swap cycles. PXI chassis fan failure is the most common wear item — chassis fans are field-replaceable. VXI embedded controllers most commonly develop EEPROM corruption and GPIB interface failure.
Curtiss-Wright / Systran SCRAMNet GT200 price
This Curtiss-Wright / Systran SCRAMNet GT200 is listed at $3,200. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Curtiss-Wright / Systran SCRAMNet GT200 calibration cost
NIST-traceable calibration for the Curtiss-Wright / Systran SCRAMNet GT200 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. Turnaround is 1 to 3 business days after receipt. See full calibration details →
