KGS Electronics SPC-6-750
KGS Electronics Programmable AC Power Source. Voltage: 115 VAC ± 15 VAC, Voltage: 115 VAC (100–125 VAC adjustable) or 26 VAC (22.6.
- Model
- KGS Electronics SPC-6-750
- Calibration
- Available on request
- Price
- $1,850
- Status
- In stock
- RFQ ref
- SPC-6-750
This unit
The KGS Electronics SPC-6-750 is a solid-state frequency changer that converts standard AC input power into a stable 400 Hz sine wave output. Single-phase design with dual output voltage capability (115 VAC and 26 VAC) delivers up to 750 VA total power, making it ideal for avionic test benches, radar systems, compass calibration, and flight simulator power supplies. Built-in protection includes input overvoltage shutdown (>135 VAC), 15 A circuit breaker, output frequency monitoring, and audible overload warning.
Technical Specifications Input
Voltage: 115 VAC ± 15 VAC
Frequency: 50/60 Hz
Phase: Single
Protection: Overvoltage shutdown above 135 VAC; 15 A circuit breaker (power on/off switch) Output
Voltage: 115 VAC (100–125 VAC adjustable) or 26 VAC (22.6–28.2 VAC adjustable)
Power: 750 VA at 115 VAC; 500 VA at 26 VAC; 750 VA total
Frequency: 400 Hz (380–420 Hz adjustable)
Waveform: Sine wave
Amplitude Distortion: 2% typical
Power Factor: 0.8–0.95 Environmental & Physical
Operating Temperature: −40°C to +71°C
Dimensions: 17" W × 13" D × 7" H (19" relay rack compatible)
Weight: 32 lbs
Cooling: Internal thermostatically controlled fan
Key Features
Dual-output configuration supports both 115 VAC and 26 VAC loads simultaneously
400 Hz sine wave output with ±20 Hz adjustment range maintains precision for frequency-sensitive equipment
Overload capability: delivers 150% rated current for minimum 5 minutes
Short-circuit withstand: maintains operation for minimum 1 minute under fault conditions
Automatic shutdown when output frequency falls below 375 Hz or exceeds 425 Hz, or when output voltage exceeds 130 VAC
Audible warning triggers at 130% rated load
Low amplitude distortion (2% typical) ensures clean power delivery
Typical Applications
Avionic test benches requiring 400 Hz power standards
Radar system power conditioning
Compass calibration equipment
Flight simulator power supplies
Military and aerospace ground support equipment
Compatibility & Integration
Front panel: 5-way binding posts
Rear panel: 6-32 terminal block connections
Single-phase input and output architecture simplifies integration into existing lab and test environments
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 50/60 Hz input |
| 400 Hz output (380–420 Hz adjustable) | Voltage / Current Range | Input: 115 VAC ± 15 VAC |
| Output | 115 VAC (100–125 VAC) or 26 VAC (22.6–28.2 VAC) |
KGS Electronics SPC-6-750 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the KGS Electronics SPC-6-750. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
KGS Electronics SPC-6-750 price
This KGS Electronics SPC-6-750 is listed at $1,850. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
KGS Electronics SPC-6-750 calibration cost
NIST-traceable calibration for the KGS Electronics SPC-6-750 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
