Digi STS 1008 SCSI Terminal Server
The Digi STS 1008 is a SCSI terminal server that allows users to connect to SCSI devices over a network. It features eight ports and supports a variety of protocols, including TCP/IP, Telnet, and PPP. Ideal for remote access and management of SCSI devices in data centers and other environments.
- Model
- Digi STS 1008
- Calibration
- Available on request
- Price · starting from
- $275
- Status
- In stock
- RFQ ref
- STS 1008
This unit
The Digi STS 1008 SCSI Terminal Server is a network-attached device that bridges SCSI peripherals to remote systems by presenting them as standard serial ports over TCP/IP connectivity. This enables centralized management and access to SCSI-based equipment without requiring direct physical proximity, making it ideal for distributed computing environments and legacy system integration.
Technical Specifications Processor & Memory
40 MHz 188 embedded microcontroller
128 KB Flash RAM, zero wait-states
128 KB Flash EPROM, zero wait-states SCSI Interface
Two 50-pin SCSI-2 connectors with daisy-chain support
Data transfer rates up to 5 Mbps (synchronous and asynchronous)
SCSI ID configuration and termination control via switch Serial Connectivity
Multiple asynchronous serial ports (EIA-232)
Baud rates to 230 Kbps
Full modem control: RTS, CTS, DTR, DSR, DCD
RJ45 female connectors
Appears as native COM ports (Windows NT) or TTY ports (UNIX) Optional Parallel Port
Centronics-compatible printer interface with DB25 female pinout (output only) Power
120 VAC, 60 Hz (U.S./Canada) or 100-240 VAC, 50-60 Hz (universal) Physical
Dimensions: 8.1" W × 5.9" D × 1.2" H (20.6 × 14.8 × 3.1 cm)
Unit weight: 1.2 lbs (0.6 kg)
Shipping weight: 4.2 lbs maximum (1.8 kg) Compliance
FCC Class A, CE mark, DOC Class A
UL, CUL
Key Features
TCP/IP and Telnet protocol support for network-based device access
Supports PPP connectivity
Dual SCSI-2 connectors enable equipment daisy-chaining
Compact 1.2-inch form factor suitable for rack and panel mounting
Typical Applications Remote console access to legacy SCSI storage systems, distributed printer management, centralized peripheral control in multi-user UNIX and Windows NT environments.
Compatibility & Integration Operating systems: UNIX (Sun, Hewlett-Packard, DEC/Compaq, Silicon Graphics) and Windows NT. Compatible with a broad range of SCSI peripherals.
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | 100-240 VAC 50-60 Hz, 120 VAC 60 Hz |
Digi STS 1008 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Digi STS 1008. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Digi STS 1008 price
This Digi STS 1008 is listed at $275. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Digi STS 1008 calibration cost
NIST-traceable calibration for the Digi STS 1008 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
