Curtiss-Wright / DY-4 SVME-179-100 Single Board Computer - Conformal Coated
Curtiss-Wright / DY-4 VME Modules. Model: SVME-179-100.
- Model
- Curtiss-Wright / DY-4 SVME-179-100
- Calibration
- Available on request
- Price
- $2,600
- RFQ ref
- SVME-179-100
This unit
The Curtiss-Wright/DY-4 SVME-179-100 is a single board computer engineered for military, aerospace, and industrial applications requiring reliable operation in harsh environments. Built on PowerPC architecture with conformal coating protection, this VME64-based SBC delivers 3.2 GFLOPS at 400 MHz while consuming only 17 W typical power.
Technical Specifications Processor & Performance
PowerPC 750 or PowerPC 7400 (AltiVec-enhanced) CPU
Clock speed: 400 MHz
Computing capacity: 3.2 GFLOPS
1 MB (750) or 2 MB (7400) L2 cache with parity error detection Memory Architecture
SDRAM with ECC: 64, 128, or 256 MB options
Direct-mapped Flash Memory: up to 48 MB (64-bit wide)
AutoStore nvSRAM: 32 KB
Serial EEPROM: 512 bytes
64-bit PCI bus: 264 MB/sec peak transfer rate
L2 cache bus: 1.06 GBytes/sec at 133 MHz I/O & Connectivity
Two 64-bit, 33 MHz PMC (PCI Mezzanine Card) sites
10/100BaseTX Ethernet
Ultra SCSI-2 (8 or 16-bit) with 20 MB/sec synchronous / 7 MB/sec asynchronous; Wide Ultra SCSI-3 optional
Two EIA-232 serial ports
Two EIA-422/485 serial channels with HDLC/SDLC capability; one DMA-capable
Asynchronous baud rates to 153,600 bps; synchronous to 1.6 Mbps (85230 ESCC)
12-bit TTL discrete I/O with interrupt capability Timers & Control
One 32-bit and three 24-bit general-purpose timers
Three 16-bit system timers
Programmable watchdog timer
Real-time clock with automatic +5 V/+5 V STDBY switchover
Four PCI DMA controllers VME Interface
Tundra Universe II™ VME64 master/slave architecture Power Supply
Basecard: +5 V only
Backplane: 3.3 V, 5 V, ±12 V (routed to PMC sites)
Dissipation: 17 W typical (750 CPU)
Key Features
Fully 64-bit architecture for demanding applications
Conformal coating for environmental protection
Single 0.8-inch slot VME form factor
Built-in Test (BIT) firmware with 95% fault coverage
Low power envelope suitable for mobile platforms
Compatibility & Integration
VxWorks®/Tornado BSP and driver suite
LynxOS™ reference port available
Foundation firmware includes debug monitor, NV memory programmer, and card support routines
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | '+5V, +5V basecard |
Curtiss-Wright / DY-4 SVME-179-100 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Curtiss-Wright / DY-4 SVME-179-100. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Curtiss-Wright / DY-4 SVME-179-100 price
This Curtiss-Wright / DY-4 SVME-179-100 is listed at $2,600. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Curtiss-Wright / DY-4 SVME-179-100 calibration cost
NIST-traceable calibration for the Curtiss-Wright / DY-4 SVME-179-100 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
